16.4.7 Lab – Configure Network Devices with SSH Topology Addressing Table Device Interface IP Address Subnet Mask Default Gateway R1 G0/0/1 192.168.1.1 255.255.255.0 N/A S1 VLAN 1 192.168.1.11 255.255.255.0 192.168.1.1 PC-A NIC 192.168.1.3 255.255.255.0 192.168.1.1 Objectives Part 1: Configure Basic Device Settings Part 2: Configure the Router for SSH Access Part 3: Configure the Switch for SSH Access Part 4: SSH from the CLI on the Switch Background / Scenario In the past, Telnet was the most common network protocol used to remotely configure network devices. Telnet does not encrypt the information between the client and server. This allows a … Continue reading 16.4.7 Lab – Configure Network Devices with SSH (Answers)