CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020

How to find: Press “Ctrl + F” in the browser and fill in whatever wording is in the question to find that question/answer. If the question is not here, find it in Questions Bank.

NOTE: If you have the new question on this test, please comment Question and Multiple-Choice list in form below this article. We will update answers for you in the shortest time. Thank you! We truly value your contribution to the website.

1. Which term refers to a network that provides secure access to the corporate offices by suppliers, customers and collaborators?

  • Internet
  • intranet
  • extranet
  • extendednet

Explain:
The term Internet refers to the worldwide collection of connected networks. Intranet refers to a private connection of LANs and WANS that belong to an organization and is designed to be accessible to the members of the organization, employees, or others with authorization. Extranets provide secure and safe access to ​suppliers, customers, and collaborators. Extendednet is not a type of network.

2. A small business user is looking for an ISP connection that provides high speed digital transmission over regular phone lines. What ISP connection type should be used?

  • DSL
  • dial-up
  • satellite
  • cell modem
  • cable modem

Explain:
DSL is the best technology to use over existing phone lines. A lot of ISPs have a lookup on their website where you can enter your phone number and see if they can offer you service.

3. Refer to the exhibit. An administrator is trying to configure the switch but receives the error message that is displayed in the exhibit. What is the problem?
CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020 1

  • The entire command, configure terminal, must be used.
  • The administrator is already in global configuration mode.
  • The administrator must first enter privileged EXEC mode before issuing the command.
  • The administrator must connect via the console port to access global configuration mode.

Explain:
In order to enter global configuration mode, the command configure terminal, or a shortened version such as config t, must be entered from privileged EXEC mode. In this scenario the administrator is in user EXEC mode, as indicated by the > symbol after the hostname. The administrator would need to use the enable command to move into privileged EXEC mode before entering the configure terminal command.

4. Which keys act as a hot key combination that is used to interrupt an IOS process?

  • Ctrl-Shift-X
  • Ctrl-Shift-6
  • Ctrl-Z
  • Ctrl-C

Explain:
The Cisco IOS provides both hot keys and shortcuts for configuring routers and switches. The Ctrl-Shift-6 hot key combination is used to interrupt an IOS process, such as a ping or traceroute. Ctrl-Z is used to exit the configuration mode. Ctrl-C aborts the current command. Ctrl-Shift-X has no IOS function.

5. Refer to the exhibit. A network administrator is configuring access control to switch SW1. If the administrator uses Telnet to connect to the switch, which password is needed to access user EXEC mode?

CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020 2

  • letmein
  • secretin
  • lineconin
  • linevtyin

Explain:
Telnet accesses a network device through the virtual interface configured with the line VTY command. The password configured under this is required to access the user EXEC mode. The password configured under the line console 0 command is required to gain entry through the console port, and the enable and enable secret passwords are used to allow entry into the privileged EXEC mode.

6. A network administrator enters the service password­encryption command into the configuration mode of a router. What does this command accomplish?

  • This command encrypts passwords as they are transmitted across serial WAN links.
  • This command prevents someone from viewing the running configuration passwords.
  • This command enables a strong encryption algorithm for the enable secret password command.
  • This command automatically encrypts passwords in configuration files that are currently stored in NVRAM.
  • This command provides an exclusive encrypted password for external service personnel who are required to do router maintenance.

7. What is the purpose of the SVI on a Cisco switch?

  • The SVI provides a physical interface for remote access to the switch.
  • The SVI provides a faster method for switching traffic between ports on the switch.
  • The SVI adds Layer 4 connectivity between VLANs.
  • The SVI provides a virtual interface for remote access to the switch.

Explain:
The SVI is a virtual, not physical, interface that provides remote access to the switch. It does not impact Layer 4 nor does it enhance switching between switch ports on the switch.

8. Which message delivery option is used when all devices need to receive the same message simultaneously?

  • duplex
  • unicast
  • multicast
  • broadcast

Explain:
When all devices need to receive the same message simultaneously, the message would be delivered as a broadcast. Unicast delivery occurs when one source host sends a message to one destination host. The sending of the same message from a host to a group of destination hosts is multicast delivery. Duplex communications refers to the ability of the medium to carry messages in both directions.

9. Which two protocols function at the internet layer? (Choose two.)

  • POP
  • BOOTP
  • ICMP
  • IP
  • PPP

Explain:
ICMP and IP both function at the internet layer, whereas PPP is a network access layer protocol, and POP and BOOTP are application layer protocols.

10. What PDU is associated with the transport layer?

  • segment
  • packet
  • frame
  • bits

Explain:
The PDU for the transport layer is called a segment. Packets, frames, and bits are PDUs for the network, data link, and physical layers respectively.

11. What is done to an IP packet before it is transmitted over the physical medium?

  • It is tagged with information guaranteeing reliable delivery.
  • It is segmented into smaller individual pieces.
  • It is encapsulated into a TCP segment.
  • It is encapsulated in a Layer 2 frame.

Explain:
When messages are sent on a network, the encapsulation process works from the top of the OSI or TCP/IP model to the bottom. At each layer of the model, the upper layer information is encapsulated into the data field of the next protocol. For example, before an IP packet can be sent, it is encapsulated in a data link frame at Layer 2 so that it can be sent over the physical medium.

12. What type of communication medium is used with a wireless LAN connection?

  • fiber
  • radio waves
  • microwave
  • UTP

Explain:
A wired LAN connection commonly uses UTP. A wireless LAN connection uses radio waves.

13. In addition to the cable length, what two factors could interfere with the communication carried over UTP cables? (Choose two.)

  • crosstalk
  • bandwidth
  • size of the network
  • signal modulation technique
  • electromagnetic interference

Explain:
Copper media is widely used in network communications. However, copper media is limited by distance and signal interference. Data is transmitted on copper cables as electrical pulses. The electrical pulses are susceptible to interference from two sources:
Electromagnetic interference (EMI) or radio frequency interference (RFI) – EMI and RFI signals can distort and corrupt the data signals being carried by copper media.
Crosstalk – Crosstalk is a disturbance caused by the electric or magnetic fields of a signal on one wire interfering with the signal in an adjacent wire.

14. What are the two sublayers of the OSI model data link layer? (Choose two.)

  • internet
  • physical
  • LLC
  • transport
  • MAC
  • network access

Explain:
The data link layer of the OSI model is divided into two sublayers: the Media Access Control (MAC) sublayer and the Logical Link Control (LLC) sublayer.

15. A technician has been asked to develop a physical topology for a network that provides a high level of redundancy. Which physical topology requires that every node is attached to every other node on the network?

  • bus
  • hierarchical
  • mesh
  • ring
  • star

Explain:
The mesh topology provides high availability because every node is connected to all other nodes. Mesh topologies can be found in WANs. A partial mesh topology can also be used where some, but not all, end points connect to one another.

16. What type of communication rule would best describe CSMA/CD?

  • access method
  • flow control
  • message encapsulation
  • message encoding

Explain:
Carrier sense multiple access collision detection (CSMA/CD) is the access method used with Ethernet. The access method rule of communication dictates how a network device is able to place a signal on the carrier. CSMA/CD dictates those rules on an Ethernet network and CSMA/CA dictates those rules on an 802.11 wireless LAN.

17. If data is being sent over a wireless network, then connects to an Ethernet network, and eventually connects to a DSL connection, which header will be replaced each time the data travels through a network infrastructure device?

  • Layer 3
  • data link
  • physical
  • Layer 4

Explain:
Because each data link layer protocol controls how the device accesses the media, the data link information must be removed and re-attached. Even if a packet is going from one Ethernet network to another Ethernet network, the data link layer information is replaced.

18. What best describes the destination IPv4 address that is used by multicasting?

  • a single IP multicast address that is used by all destinations in a group
  • an IP address that is unique for each destination in the group
  • a group address that shares the last 23 bits with the source IPv4 address
  • a 48 bit address that is determined by the number of members in the multicast group

Explain:
The destination multicast IPv4 address is a group address, which is a single IP multicast address within the Class D range.

19. In an Ethernet network, when a device receives a frame of 1200 bytes, what will it do?

  • drop the frame
  • process the frame as it is
  • send an error message to the sending device
  • add random data bytes to make the frame 1518 bytes long and then forward it

Explain:
Ethernet standards define the minimum frame as 64 bytes and a maximum of 1518 bytes. A frame less than 64 bytes is considered a “collision fragment” or “runt frame” and is automatically discarded by receiving devices. A frame greater than 1500 is considered a “baby giant”. A 1200 byte frame is within the normal range so it would be processed as is.

20. What important information is examined in the Ethernet frame header by a Layer 2 device in order to forward the data onward?

  • source MAC address
  • source IP address
  • destination MAC address
  • Ethernet type
  • destination IP address

Explain:
The Layer 2 device, such as a switch, uses the destination MAC address to determine which path (interface or port) should be used to send the data onward to the destination device.

21. What will a Layer 2 switch do when the destination MAC address of a received frame is not in the MAC table?

  • It initiates an ARP request.
  • It broadcasts the frame out of all ports on the switch.
  • It notifies the sending host that the frame cannot be delivered.
  • It forwards the frame out of all ports except for the port at which the frame was received.

Explain:
A Layer 2 switch determines how to handle incoming frames by using its MAC address table. When an incoming frame contains a destination MAC address that is not in the table, the switch forwards the frame out all ports, except for the port on which it was received.

22. What are two features of ARP? (Choose two.)

  • If a host is ready to send a packet to a local destination device and it has the IP address but not the MAC address of the destination, it generates an ARP broadcast.
  • An ARP request is sent to all devices on the Ethernet LAN and contains the IP address of the destination host and its multicast MAC address.
  • When a host is encapsulating a packet into a frame, it refers to the MAC address table to determine the mapping of IP addresses to MAC addresses.
  • If no device responds to the ARP request, then the originating node will broadcast the data packet to all devices on the network segment.
  • If a device receiving an ARP request has the destination IPv4 address, it responds with an ARP reply.

Explain:
When a node encapsulates a data packet into a frame, it needs the destination MAC address. First it determines if the destination device is on the local network or on a remote network. Then it checks the ARP table (not the MAC table) to see if a pair of IP address and MAC address exists for either the destination IP address (if the destination host is on the local network) or the default gateway IP address (if the destination host is on a remote network). If the match does not exist, it generates an ARP broadcast to seek the IP address to MAC address resolution. Because the destination MAC address is unknown, the ARP request is broadcast with the MAC address FFFF.FFFF.FFFF. Either the destination device or the default gateway will respond with its MAC address, which enables the sending node to assemble the frame. If no device responds to the ARP request, then the originating node will discard the packet because a frame cannot be created.

23. Which two services are required to enable a computer to receive dynamic IP addresses and access the Internet using domain names? (Choose two.)

  • DNS
  • WINS
  • HTTP
  • DHCP
  • SMTP

24. What is a basic characteristic of the IP protocol?

  • connectionless
  • media dependent
  • user data segmentation
  • reliable end-to-end delivery

Explain:
Internet Protocol (IP) is a network layer protocol that does not require initial exchange of control information to establish an end-to-end connection before packets are forwarded. Thus, IP is connectionless and does not provide reliable end-to-end delivery by itself. IP is media independent. User data segmentation is a service provided at the transport layer.

25. Refer to the exhibit. A user issues the command netstat –r on a workstation. Which IPv6 address is one of the link-local addresses of the workstation?
CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020 3

  • ::1/128
  • fe80::30d0:115:3f57:fe4c/128
  • fe80::/64
  • 2001:0:9d38:6ab8:30d0:115:3f57:fe4c/128

Explain:
In the IPv6 address scheme, the network of fe80::/10 is reserved for link-local addresses. The address fe80::/64 is a network address that indicates, in this workstation, fe80::/64 is actually used for link-local addresses. Thus the address fe80::30d0:115:3f57:fe4c/128 is a valid IPv6 link-local address.

26. What is the valid most compressed format possible of the IPv6 address 2001:0DB8:0000:AB00:0000:0000:0000:1234?

  • 2001:DB8:0:AB00::1234
  • 2001:DB8:0:AB::1234
  • 2001:DB8::AB00::1234
  • 2001:DB8:0:AB:0:1234

Explain:
There are two rules defining how an IPv6 address can be compressed. The first rule states that leading zeros in a hextet can be eliminated. The second rule states that a single :: can be used to represent one or more contiguous all zero hextets. There can be one and only one :: in an IPv6 address.

27. At a minimum, which address is required on IPv6-enabled interfaces?

  • link-local
  • unique local
  • site local
  • global unicast

Explain:
All IPv6 enabled interfaces must at minimum have a link-local address. Other IPv6 addresses can be assigned to the interface as required.

28. An IPv6 enabled device sends a data packet with the destination address of FF02::2. What is the target of this packet?

  • all IPv6 enabled devices across the network
  • all IPv6 enabled devices on the local link
  • all IPv6 DHCP servers
  • all IPv6 configured routers on the local link

Explain:
FF02::2 identifies all IPv6 routers that exist on the link or network. FF02::1 is the target for all IPv6 enabled devices on the link or network.​

29. What is the purpose of ICMP messages?

  • to inform routers about network topology changes
  • to ensure the delivery of an IP packet
  • to provide feedback of IP packet transmissions
  • to monitor the process of a domain name to IP address resolution

Explain:
The purpose of ICMP messages is to provide feedback about issues that are related to the processing of IP packets.

30. Which statement describes a characteristic of the traceroute utility?

  • It sends four Echo Request messages.
  • It utilizes the ICMP Source Quench messages.
  • It is primarily used to test connectivity between two hosts.
  • It identifies the routers in the path from a source host to a destination host.

Explain:
Traceroute is a utility that generates a list of hops (or routers) along the path from a source host to the destination host.

31. What is the usable number of host IP addresses on a network that has a /26 mask?

  • 256
  • 254
  • 64
  • 62
  • 32
  • 16

Explain:
A /26 mask is the same as 255.255.255.192. The mask leaves 6 host bits. With 6 host bits, 64 IP addresses are possible. One address represents the subnet number and one address represents the broadcast address, which means that 62 addresses can then be used to assign to network devices.

32. Refer to the exhibit. An administrator must send a message to everyone on the router A network. What is the broadcast address for network 172.16.16.0/22?
CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020 4

  • 172.16.16.255
  • 172.16.20.255
  • 172.16.19.255
  • 172.16.23.255
  • 172.16.255.255

Explain:
The 172.16.16.0/22 network has 22 bits in the network portion and 10 bits in the host portion. Converting the network address to binary yields a subnet mask of 255.255.252.0. The range of addresses in this network will end with the last address available before 172.16.20.0. Valid host addresses for this network range from 172.16.16.1-172.16.19.254, making 172.16.19.255 the broadcast address.

33. Given IPv6 address prefix 2001:db8::/48, what will be the last subnet that is created if the subnet prefix is changed to /52?

  • 2001:db8:0:f00::/52
  • 2001:db8:0:8000::/52
  • 2001:db8:0:f::/52
  • 2001:db8:0:f000::/52

Explain:
Prefix 2001:db8::/48 has 48 network bits. If we subnet to a /52, we are moving the network boundary four bits to the right and creating 16 subnets. The first subnet is 2001:db8::/52 the last subnet is 2001:db8:0:f000::/52.

34. A technician with a PC is using multiple applications while connected to the Internet. How is the PC able to keep track of the data flow between multiple application sessions and have each application receive the correct packet flows?

  • The data flow is being tracked based on the destination port number utilized by each application.
  • The data flow is being tracked based on the source port number utilized by each application.
  • The data flow is being tracked based on the source IP address used by the PC of the technician.
  • The data flow is being tracked based on the destination IP address used by the PC of the technician.

Explain:
The source port number of an application is randomly generated and used to individually keep track of each session connecting out to the Internet. Each application will use a unique source port number to provide simultaneous communication from multiple applications through the Internet.

35. What three services are provided by the transport layer? (Choose three.)

  • flow control
  • encryption of data
  • path determination
  • connection establishment
  • error recovery
  • bit transmission
  • data representation

Explain:
The transport layer is responsible for tracking digital conversations between a source application and a destination application through the use of port numbers. Two protocols that operate at the transport layer are TCP and UDP. TCP can provide reliability by establishing a connection, maintaining flow control, and error recovery.

36. An Internet television transmission is using UDP. What happens when part of the transmission is not delivered to the destination?

  • A delivery failure message is sent to the source host.
  • The part of the television transmission that was lost is re-sent.
  • The entire transmission is re-sent.
  • The transmission continues without the missing portion.

Explain:
Most streaming services, such as Internet television, use UDP as the transport layer protocol. These transmissions can tolerate some transmission failures, and no failure messages or retransmissions are required. Such control measures would create noticeable disruption to the flow of data.

37. Which two OSI model layers are considered to be included in the top layer of the TCP/IP protocol stack? (Choose two.)

  • internet
  • network
  • presentation
  • session
  • transport

Explain:
The top three OSI model layers are included in the top layer of the TCP/IP protocol stack. These top three OSI model layers include the application, presentation, and session layers

38. An author is uploading one chapter document from a personal computer to a file server of a book publisher. What role is the personal computer assuming in this network model?

  • client
  • master
  • server
  • slave
  • transient

Explain:
In the client/server network model, a network device assumes the role of server in order to provide a particular service such as file transfer and storage. The device requesting the service assumes the role of client. In the client/server network model, a dedicated server does not have to be used, but if one is present, the network model being used is the client/server model. In contrast, the peer-to-peer network model does not have a dedicated server.

39. Which two automatic addressing assignments are supported by DHCPv4? (Choose two.)

  • local server address
  • subnet mask
  • default gateway address
  • physical address of the recipient
  • physical address of the sender

40. When a network administrator is trying to manage network traffic on a growing network, when should traffic flow patterns be analyzed?

  • during times of peak utilization
  • during off-peak hours
  • during employee holidays and weekends
  • during randomly selected times

Explain:
Planning for network growth requires knowledge of the types of traffic traveling on the network. Network administrators can use a protocol analyzer to identify the traffic on the network. To get the best representation of the different types of traffic, the network should be analyzed during peak utilization.

41. What is the objective of a network reconnaissance attack?

  • discovery and mapping of systems
  • unauthorized manipulation of data
  • disabling network systems or services
  • denying access to resources by legitimate users

Explain:
The objective of a network reconnaissance attack is to discover information about a network, network systems, and network services.

42. A network administrator enters the service password-encryption command into the configuration mode of a router. What does this command accomplish?

  • This command encrypts passwords as they are transmitted across serial WAN links.
  • This command automatically encrypts passwords in configuration files that are currently stored in NVRAM.
  • This command provides an exclusive encrypted password for external service personnel who are required to do router maintenance.
  • This command enables a strong encryption algorithm for the enable secret password command.
  • This command prevents someone from viewing the running configuration passwords.

43. What will be the result of failed login attempts if the following command is entered into a router?

  • login block-for 150 attempts 4 within 90
  • All login attempts will be blocked for 150 seconds if there are 4 failed attempts within 90 seconds.
  • All login attempts will be blocked for 90 seconds if there are 4 failed attempts within 150 seconds.
  • All login attempts will be blocked for 1.5 hours if there are 4 failed attempts within 150 seconds.
  • All login attempts will be blocked for 4 hours if there are 90 failed attempts within 150 seconds.

Explain:
The components of the login block-for 150 attempts 4 within 90 command are as follows:
The expression block-for 150 is the time in seconds that logins will be blocked.
The expression attempts 4 is the number of failed attempts that will trigger the blocking of login requests.
The expression within 90 is the time in seconds in which the 4 failed attempts must occur.

44. Which two statements correctly describe a router memory type and its contents? (Choose two.)

  • ROM is nonvolatile and stores the running IOS.
  • FLASH is nonvolatile and contains a limited portion of the IOS​.
  • RAM is volatile and stores the IP routing table.
  • NVRAM is nonvolatile and stores a full version of the IOS.
  • ROM is nonvolatile and contains basic diagnostic software.

Explain:
ROM is a nonvolatile memory and stores bootup instructions, basic diagnostic software, and a limited IOS. Flash is a nonvolatile memory used as permanent storage for the IOS and other system-related files. RAM is volatile memory and stores the IP routing table, IPv4 to MAC address mappings in the ARP cache, packets that are buffered or temporarily stored, the running configuration, and the currently running IOS. NVRAM is a nonvolatile memory that stores the startup configuration file.

45. A user reports a lack of network connectivity. The technician takes control of the user machine and attempts to ping other computers on the network and these pings fail. The technician pings the default gateway and that also fails. What can be determined for sure by the results of these tests?

  • The NIC in the PC is bad.
  • The TCP/IP protocol is not enabled.
  • The router that is attached to the same network as the workstation is down.
  • Nothing can be determined for sure at this point.

Explain:
In networks today, a failed ping could mean that the other devices on the network are blocking pings. Further investigation such as checking network connectivity from other devices on the same network is warranted.

46. For Cisco IOS, which escape sequence allows terminating a traceroute operation?

  • Ctrl+Shift+6
  • Ctrl+Esc
  • Ctrl+x
  • Ctrl+c

Explain:
Once a traceroute is initiated in the Cisco IOS, it can be stopped by issuing the Ctrl+Shift+6 escape sequence.

47. Match the phases to the functions during the boot up process of a Cisco router. (Not all options are used.)
CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020 5
CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020 6
Place the options in the following order.
— not scored —
locale and load the Cisco IOS software -> phase 2
locate and load the startup configuration file -> phase 3
perform the POST and load the bootstrap program -> phase 1

Explain:
There are three major phases to the bootup process of a Cisco router:
Perform the POST and load the bootstrap program.
Locate and load the Cisco IOS software.
Locate and load the startup configuration file
If a startup configuration file cannot be located, the router will enter setup mode by displaying the setup mode prompt.

48. What three blocks of addresses are defined by RFC 1918 for private network use? (Choose three.)

  • 10.0.0.0/8
  • 172.16.0.0/12
  • 192.168.0.0/16
  • 100.64.0.0/14
  • 169.254.0.0/16
  • 239.0.0.0/8


Explain:RFC 1918, Address Allocation for Private Internets, defines three blocks of IPv4 address for private networks that should not be routable on the public Internet.
10.0.0.0/8
172.16.0.0/12
192.168.0.0/16

49. A network administrator is variably subnetting a given block of IPv4 addresses. Which combination of network addresses and prefix lengths will make the most efficient use of addresses when the need is for 2 subnets capable of supporting 10 hosts and 1 subnet that can support 6 hosts?

  • 10.1.1.128/28
    10.1.1.144/28
    10.1.1.160/29
  • 10.1.1.128/28
    10.1.1.144/28
    10.1.1.160/2810.1.1.128/28
    10.1.1.140/28
    10.1.1.158/26
  • 10.1.1.128/26
    10.1.1.144/26
    10.1.1.160/26
  • 10.1.1.128/26
    10.1.1.140/26
    10.1.1.158/28

Explain:
Prefix lengths of /28 and /29 are the most efficient to create subnets of 16 addresses (to support 10 hosts) and 8 addresses (to support 6 hosts), respectively. Addresses in one subnet must also not overlap into the range of another subnet.

50. Match the descriptions to the terms. (Not all options are used.)

Question
CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020 7

Answer
CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020 8

Place the options in the following order.
— not scored —
CLI -> users interact with the operating system by typing commands
GUI -> enables the user to interact with the operating system by pointing and clicking
kernel -> the part of the OS that interacts directly with the device hardware
shell -> the part of the operating system that interfaces with applications and the user

Explain:
A GUI, or graphical user interface, allows the user to interact with the operating system by pointing and clicking at elements on the screen. A CLI, or command-line interface, requires users to type commands at a prompt in order to interact with the OS. The shell is the part of the operating system that is closest to the user. The kernel is the part of the operating system that interfaces with the hardware.

51. Match the requirements of a reliable network with the supporting network architecture. (Not all options are used.)

Question
CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020 9

Answer
CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020 10

Place the options in the following order.
Protect the network from unauthorized access. -> security
Provide redundant links and devices. -> fault tolerance
— not scored —
Expand the network without degrading the service for existing users. -> scalability
— not scored —

52. Match the functions with the corresponding OSI layer. (Not all options are used.)

Question
CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020 11

Answer
CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020 12

Place the options in the following order.
Application layer
HTTP and FTP
end user program functionality
Presentation layer
compression
common format
Session layer
dialog maintenance

53. What subnet mask is required to support 512 subnets on networks 172.28.0.0/16?

  • 255.255.240.0
  • 255.255.255.224
  • 255.255.255.240
  • 255.255.255.128
  • 255.255.252.0

54. A DHCP server is used to IP addresses dynamically to the hosts on a network. The address pool is configured with 10.29.244.0/25. There are 19 printers on this network that need to use reserve static IP addresses from the pool. How many IP address in the pool are left to be assign to other hosts?

  • 210
  • 60
  • 109
  • 107
  • 146

Older Version

55. What is an advantage of storing configuration files to a USB flash drive instead of to a TFTP server?

  • The files can be saved without using terminal emulation software.
  • The transfer of the files does not rely on network connectivity.
  • The USB flash drive is more secure.
  • The configuration files can be stored to a flash drive that uses any file system format.

56. Refer to the exhibit. An administrator is trying to view the current configuration on this switch but receives the error message that is displayed. What does this error indicate?
CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020 13

  • The command does not exist.
  • One or more required keywords or arguments were omitted.
  • Not enough characters were entered for the interpreter to recognize the command.
  • The administrator does not have the required level of access to use this command.

57. A host is accessing a Web server on a remote network. Which three functions are performed by intermediary network devices during this conversation? (Choose three.)

  • regenerating data signals
  • acting as a client or a server
  • providing a channel over which messages travel
  • applying security settings to control the flow of data
  • notifying other devices when errors occur
  • serving as the source or destination of the messages

58. For which three reasons was a packet-switched connectionless data communications technology used when developing the Internet? (Choose three.)

  • It can rapidly adapt to the loss of data transmission facilities.
  • It efficiently utilizes the network infrastructure to transfer data.
  • Data packets can travel multiple paths through the network simultaneously.
  • It allows for billing of network use by the amount of time a connection is established.
  • It requires that a data circuit between the source and destination be established before data can be transferred.

59. A medium-sized business is researching available options for connecting to the Internet. The company is looking for a high speed option with dedicated, symmetric access. Which connection type should the company choose?

  • DSL
  • dialup
  • satellite
  • leased line
  • cable modem

60. What is an ISP?

  • It is a standards body that develops cabling and wiring standards for networking.
  • It is a protocol that establishes how computers within a local network communicate.
  • It is an organization that enables individuals and businesses to connect to the Internet.
  • It is a networking device that combines the functionality of several different networking devices in one.

61. Refer to the exhibit. A network engineer is attempting to connect to a new router to perform the initial configuration. The engineer connects a rollover cable from the serial port of a PC to the Aux port on the router, then configures HyperTerminal as shown. The engineer cannot get a login prompt in HyperTerminal. What would fix the problem?

CCNA 1 Practice Final Answer 001 (v5.02, 2015)

CCNA 1 Practice Final Answer 001 (v5.02, 2015)

  • Connect to the Ethernet port on the PC.
  • Change connection settings to even parity.
  • Move the cable to the router console port.
  • Use a crossover cable instead of a rollover cable.

62. Which connection provides a secure CLI session with encryption to a Cisco router?

  • a console connection
  • an AUX connection
  • a Telnet connection
  • an SSH connection

63. Refer to the exhibit. From global configuration mode, an administrator is attempting to create a message-of-the-day banner by using the command banner motd V Authorized access only! Violators will be prosecuted! V When users log in using Telnet, the banner does not appear correctly. What is the problem?

CCNA 1 Practice Final Answer 003 (v5.02, 2015)

CCNA 1 Practice Final Answer 003 (v5.02, 2015)

  • The banner message is too long.
  • The delimiting character appears in the banner message.
  • The symbol “!” signals the end of a banner message.
  • Message-of-the-day banners will only appear when a user logs in through the console port.

64. What will happen if the default gateway address is incorrectly configured on a host?

  • The host cannot communicate with other hosts in the local network.
  • The switch will not forward packets initiated by the host.
  • The host will have to use ARP to determine the correct address of the default gateway.
  • The host cannot communicate with hosts in other networks.
  • A ping from the host to 127.0.0.1 would not be successful.

65. A network administrator is designing a new network infrastructure that includes both wired and wireless connectivity. Under which situation would a wireless connection be recommended?

  • The end-user device only has an Ethernet NIC.
  • The end-user device requires a dedicated connection because of performance requirements.
  • The end-user device needs mobility when connecting to the network.
  • The end-user device area has a high concentration of RFI.

66. A network administrator is troubleshooting connectivity issues on a server. Using a tester, the administrator notices that the signals generated by the server NIC are distorted and not usable. In which layer of the OSI model is the error categorized?

  • presentation layer
  • network layer
  • physical layer
  • data link layer

67. Refer to the exhibit. Which layer of the OSI model would format data in this way?

CCNA 1 Practice Final Answer 005 (v5.02, 2015)

CCNA 1 Practice Final Answer 005 (v5.02, 2015)

  • physical
  • network
  • data link
  • transport
  • application

68. On a point-to-point network, which communication type is used when two devices can both transmit and receive but not at the same time?

  • controlled access
  • deterministic
  • full-duplex
  • half-duplex

Explanation: Half-duplex communication occurs when both devices can both transmit and receive on the medium but cannot do so simultaneously. Full-duplex communication occurs when both devices can transmit and receive on the medium at the same time. Half-duplex communication is typically contention-based, whereas controlled (deterministic) access is applied in technologies where devices take turns to access the medium.

69. A frame is transmitted from one networking device to another. Why does the receiving device check the FCS field in the frame?

  • to determine the physical address of the sending device
  • to verify the network layer protocol information
  • to compare the interface media type between the sending and receiving ends
  • to check the frame for possible transmission errors
  • to verify that the frame destination matches the MAC address of the receiving device

70. The ARP table in a switch maps which two types of address together?

  • Layer 3 address to a Layer 2 address
  • Layer 3 address to a Layer 4 address
  • Layer 4 address to a Layer 2 address
  • Layer 2 address to a Layer 4 address

71. What are two actions performed by a Cisco switch? (Choose two.)

  • building a routing table that is based on the first IP address in the frame header
  • using the source MAC addresses of frames to build and maintain a MAC address table
  • forwarding frames with unknown destination IP addresses to the default gateway
  • utilizing the MAC address table to forward frames via the destination MAC address
  • examining the destination MAC address to add new entries to the MAC address table

72. Which two functions are primary functions of a router? (Choose two.)

  • packet switching
  • microsegmentation
  • domain name resolution
  • path selection
  • flow control

73. A router boots and enters setup mode. What is the reason for this?

  • The IOS image is corrupt.
  • Cisco IOS is missing from flash memory.
  • The configuration file is missing from NVRAM.
  • The POST process has detected hardware failure.

Explanation: If a router cannot locate the startup-config file in NVRAM, it will enter setup mode to allow the configuration to be entered from the console device.

74. Using default settings, what is the next step in the router boot sequence after the IOS loads from flash?

  • Perform the POST routine.
  • Search for a backup IOS in ROM.
  • Load the bootstrap program from ROM.
  • Load the running-config file from RAM.
  • Locate and load the startup-config file from NVRAM.

Explanation: There are three major steps to the router boot sequence:

  1. Perform Power-On-Self-Test (POST)
  2. Load the IOS from Flash or TFTP server
  3. Load the startup configuration file from NVRAM

75. What are two ways that TCP uses the sequence numbers in a segment? (Choose two.)

  • to identify missing segments at the destination
  • to reassemble the segments at the remote location
  • to specify the order in which the segments travel from source to destination
  • to limit the number of segments that can be sent out of an interface at one time
  • to determine if the packet changed during transit

76. A high school in New York (school A) is using videoconferencing technology to establish student interactions with another high school (school B) in Russia. The videoconferencing is conducted between two end devices through the Internet. The network administrator of school A configures the end device with the IP address 192.168.25.10. The administrator sends a request for the IP address for the end device in school B and the response is 192.168.25.10. The administrator knows immediately that this IP will not work. Why?

  • This is a loopback address.
  • This is a link-local address.
  • This is a private IP address.
  • There is an IP address conflict.

77. Which service will translate private internal IP addresses into Internet routable public IP addresses?

  • ARP
  • DHCP
  • DNS
  • NAT

78. Which IPv6 address notation is valid?

  • 2001:0DB8::ABCD::1234
  • ABCD:160D::4GAB:FFAB
  • 2001:DB8:0:1111::200
  • 2001::ABCD::

Explanation: IPv6 addresses are represented by 32 hexadecimal digits (0-9, A-F). The size of the notation can be reduced by eliminating leading zeroes in any hextet and by replacing a single, contiguous string of hextets containing all zeroes with a double colon, which can only be used one time.

79. Which range of link-local addresses can be assigned to an IPv6-enabled interface??

  • FEC0::/10?
  • FDEE::/7?
  • FEBF::/10
  • FF00::/8?

80. What are the three parts of an IPv6 global unicast address? (Choose three.)

  • broadcast address
  • global routing prefix
  • subnet mask
  • subnet ID
  • interface ID

Explanation: The general format for IPv6 global unicast addresses includes a global routing prefix, a subnet ID, and an interface ID. The global routing prefix is the network portion of the address. A typical global routing prefix is /48 assigned by the Internet provider. The subnet ID portion can be used by an organization to create multiple subnetwork numbers. The interface ID is similar to the host portion of an IPv4 address.

81. A network administrator has been issued a network address of 192.31.7.64/26. How many subnets of equal size could be created from the assigned /26 network by using a /28 prefix?

  • 3
  • 4
  • 6
  • 8
  • 14
  • 16

82. A small satellite office has been given the overall network number of 192.168.99.0/24 and the network technician can subdivide the network addresses as needed. The office needs network access for both wired and wireless devices. However, because of the security consideration, these two networks should be separate. The wired network will have 20 devices. The wireless network has a potential connection of 45 devices. Which addressing scheme would be most efficient for these two networks?

  • 192.168.99.0/26
    192.168.99.64/27
  • 192.168.99.0/27
    192.168.99.32/26
  • 192.168.99.0/27
    192.168.99.32/28
  • 192.168.99.0/28
    192.168.99.16/28
  • 192.168.99.0/28
    192.168.99.64/26

83. The administrator of a branch office receives an IPv6 prefix of 2001:db8:3000::/52 from the corporate network manager. How many subnets can the administrator create?

  • 1024
  • 2048
  • 4096
  • 8192
  • 65536

84. A user is attempting to do an http://www.cisco.com/ without success. Which two configuration values must be set on the host to allow this access? (Choose two.)

  • DNS server
  • WINS server
  • HTTP server
  • default gateway
  • Netbios

85. Which devices should be secured to mitigate against MAC address spoofing attacks?

  • Layer 7 devices
  • Layer 4 devices
  • Layer 2 devices
  • Layer 3 devices

86. Which router configuration mode would an administrator use to configure the router for SSH or Telnet login access?

  • line
  • router
  • global
  • interface
  • privileged EXEC

87. Refer to the exhibit. An administrator is testing connectivity to a remote device with the IP address 10.1.1.1. What does the output of this command indicate?

CCNA 1 Practice Final Answer 007 (v5.02, 2015)

CCNA 1 Practice Final Answer 007 (v5.02, 2015)

  • Connectivity to the remote device was successful.
  • A router along the path did not have a route to the destination.
  • A ping packet is being blocked by a security device along the path.
  • The connection timed out while waiting for a reply from the remote device.

88. Which is a function of the show ip route command when used as a tool for troubleshooting network connectivity?

  • indicates the point of failure in the connection
  • shows the IP address of the next hop router for each route
  • lists the IP addresses of all hops the traffic will pass through to reach the destination network
  • shows the incoming and outgoing interfaces the traffic will go through in order to reach the destination network

89. A user calls the help desk to report that a Windows XP workstation is unable to connect to the network after startup and that a popup window says “This connection has limited or no connectivity.” The technician asks the user to issue the ipconfig /all command. The user reports the IP address is 169.254.69.196 with subnet mask of 255.255.0.0 and nothing is displayed for the DNS server IP address. What is the cause of the problem?

  • The workstation NIC has malfunctioned.
  • The subnet mask was configured incorrectly.
  • The DNS server IP address needs to be configured.
  • The workstation is unable to obtain an IP address from a DHCP server.

90. A particular email site does not appear to be responding on a Windows 7 computer. What command could the technician use to show any cached DNS entries for this web page?

  • ipconfig /all
  • arp -a
  • ipconfig /displaydns
  • nslookup

91. To revert to a previous configuration, an administrator issues the command copy tftp startup-config on a router and enters the host address and file name when prompted. After the command is completed, why does the current configuration remain unchanged?

  • The command should have been copy startup-config tftp.
  • The configuration should have been copied to the running configuration instead.
  • The configuration changes were copied into RAM and require a reboot to take effect.
  • A TFTP server can only be used to restore the Cisco IOS, not the router configuration.

92. Refer to the graphic. What is the effect of setting the security mode to WEP on the Linksys integrated router?

CCNA 1 Practice Final Answer 008 (v5.02, 2015)

CCNA 1 Practice Final Answer 008 (v5.02, 2015)

  • It identifies the wireless LAN.
  • It allows the access point to inform clients of its presence.
  • It translates IP addresses into easy-to-remember domain names.
  • It encrypts data between the wireless client and the access point.
  • It translates an internal address or group of addresses into an outside, public address.

93. Which type of wireless security is easily compromised?

  • EAP
  • PSK
  • WEP
  • WPA

94. Refer to the exhibit. Which two settings could be changed to improve security on the wireless network? (Choose two.)

CCNA 1 Practice Final Answer 009 (v5.02, 2015)

CCNA 1 Practice Final Answer 009 (v5.02, 2015)

  • network mode
  • SSID
  • radio band
  • wide channel
  • standard channel
  • SSID broadcast

95. Fill in the blank. Do not abbreviate. Use lower case.
Which interface configuration mode command puts a Layer 3 switch interface into Layer 3 mode? no switchport

96. Fill in the blank.
A nibble consists of 4 bits.

97. Match each item to the type of topology diagram on which it is typically identified. (Not all options are used.)
CCNA 1 Practice Final Answer 010 (v5.02, 2015)

98. Match the situation with the appropriate use of network media.
CCNA 1 Practice Final Answer 011 (v5.02, 2015)

100. Open the PT activity. Perform the tasks in the activity instructions and then fill in the blank.
The Server0 message is winner.?

101. Which two statements are correct in a comparison of IPv4 and IPv6 packet headers? (Choose two.)

  • The Source Address field name from IPv4 is kept in IPv6.
  • The Version field from IPv4 is not kept in IPv6.
  • The Destination Address field is new in IPv6.
  • The Header Checksum field name from IPv4 is kept in IPv6.
  • The Time-to-Live field from IPv4 has been replaced by the Hop Limit field in IPv6.

Explanation: The IPv6 packet header fields are as follows: Version, Traffic Class, Flow Label, Payload Length, Next Header, Hop Limit, Source Address, and Destination Address. The IPv4 packet header fields include the following: Version, Differentiated Services, Time-to-Live, Protocol, Source IP Address, and Destination IP Address. Both versions have a 4-bit Version field. Both versions have a Source (IP) Address field. IPv4 addresses are 32 bits; IPv6 addresses are 128 bits. The Time-to-Live or TTL field in IPv4 is now called Hop Limit in IPv6, but this field serves the same purpose in both versions. The value in this 8-bit field decrements each time a packet passes through any router. When this value is 0, the packet is discarded and is not forwarded to any other router.

102. Why are port numbers included in the TCP header of a segment?

  • to allow the receiving host to assemble the packet in the proper order
  • to enable a receiving host to forward the data to the appropriate application
  • to determine which Layer 3 protocol should be used to encapsulate the data
  • to identify which switch ports should receive or forward the segment
  • to indicate the correct router interface that should be used to forward a segment

103. Open the PT Activity. Perform the tasks in the activity instructions and then answer the question.
CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020 14
What is the secret keyword that is displayed on the web page?

  • cisco
  • switch
  • frame
  • packet
  • router

104. Which two types of applications rely on their traffic having priority over other traffic types through the network? (Choose two.)

  • email
  • voice
  • file transfer
  • instant messaging
  • video

105. Fill in the blank.
In dotted decimal notation, the IP address “172.25.0.126” is the last host address for the network 172.25.0.64/26.

106. What are two characteristics of a scalable network? (Choose two.)

  • is not as reliable as a small network
  • grows in size without impacting existing users
  • easily overloaded with increased traffic
  • suitable for modular devices that allow for expansion
  • offers limited number of applications

107. Match the subnetwork to a host address that would be included within the subnetwork. (Not all options are used.)
CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020 15

Explanation: Subnet 192.168.1.32/27 will have a valid host range from 192.168.1.33 – 192.168.1.62 with the broadcast address as 192.168.1.63
Subnet 192.168.1.64/27 will have a valid host range from 192.168.1.65 – 192.168.1.94 with the broadcast address as 192.168.1.95
Subnet 192.168.1.96/27 will have a valid host range from 192.168.1.97 – 192.168.1.126 with the broadcast address as 192.168.1.127

108. What information is added during encapsulation at OSI Layer 3?

  • source and destination port number
  • source and destination MAC
  • source and destination IP address
  • source and destination application protocol

109. Refer to the exhibit. HostA is attempting to contact ServerB. Which two statements correctly describe the addressing that HostA will generate in the process? (Choose two.)
CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020 16

  • A packet with the destination IP address of RouterA.
  • A frame with the destination MAC address of SwitchA.
  • A frame with the destination MAC address of RouterA.
  • A packet with the destination IP address of RouterB.
  • A packet with the destination IP address of ServerB.
  • A frame with the destination MAC address of ServerB.

110. What will a host on an Ethernet network do if it receives a frame with a destination MAC address that does not match its own MAC address?

  • It will remove the frame from the media.
  • It will discard the frame.
  • It will forward the frame to the next host.
  • It will strip off the data-link frame to check the destination IP address.

111. A PC that is communicating with a web server is utilizing a window size of 6,000 bytes when sending data and a packet size of 1,500 bytes. What byte of information will the web server acknowledge after it has received four packets of data from the PC?

  • 1,500
  • 5
  • 6,001
  • 1,501
  • 6,000

112. What three primary functions does data link layer encapsulation provide? (Choose three.)

  • error detection
  • port identification
  • addressing
  • path determination
  • IP address resolution
  • frame delimiting

113. Fill in the blank using a number.
The minimum Ethernet frame size is “64” bytes. Anything smaller than that should be considered a “runt frame.”

114. What three statements describe features or functions of media access control? (Choose three.)

  • Ethernet utilizes CSMA/CD.
  • 802.11 utilizes CSMA/CD.
  • It uses contention-based access also known as deterministic access.
  • Data link layer protocols define the rules for access to different media.
  • Controlled media access involves collision handling.
  • It is responsible for detecting transmission errors in transmitted data.

115. Open the PT activity. Perform the tasks in the activity instructions and then answer the question.
CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020 17
Which information is obtained from this command output?

  • 10.20.20.3, non-authoritative answer
  • 10.20.20.4, non-authoritative answer
  • 10.20.20.3, authoritative answer
  • 10.20.20.4, authoritative answer

116. What makes fiber preferable to copper cabling for interconnecting buildings? (Choose three.)

  • greater bandwidth potential
  • limited susceptibility to EMI/RFI
  • durable connections
  • easily terminated
  • greater distances per cable run
  • lower installation cost

117. A network team is comparing physical WAN topologies for connecting remote sites to a headquarters building. Which topology provides high availability and connects some, but not all, remote sites?

  • point-to-point
  • mesh
  • partial mesh
  • hub and spoke

118. What is the function of CSMA/CA in a WLAN?

  • It assures that clients are connected to the correct WLAN.
  • It describes the smallest building block of the WLAN.
  • It provides the mechanism for media access.
  • It allows a host to move between cells without loss of signal.

119. Fill in the blank.
A nibble consists of “4” bits.

120. Place the options in the following order:
CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020 18
CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020 19
[+] cables connecting rooms to wiring closets
[+] desktop PC in a classroom
[#] IP address of a server
[#] a switch located in a classroom
[+] Order does not matter within this group.
[#] Order does not matter within this group.

121. Why are the paired wires twisted in a CAT5 cable?

  • to improve the mechanical strength
  • to provide eletromagnetic noise cancellation
  • to facilitate cable termination in the connector
  • to extend the signaling length

122. Refer to the exhibit. What will be the result of entering this configuration the next time a network administrator connects a console cable to the router and no additional commands have been entered?
CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020 20

  • The administrator will be presented with the R1> prompt.
  • The administrator will be required to enter Cisco789.
  • The administrator will be required to enter Cisco234.
  • The administrator will be required to enter Cisco123.

123. Match each description with the appropriate type of threat (Not all options are used.)
CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020 21
CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020 22

124. Refer to the exhibit. Using VLSM, what is the largest and smallest subnet mask required on this network in order to minimize address waste?
CCNA 1 ITN (v5.1 + v6.0) Practice Final Exam Answers 100% Full 2020 23

  • 255.255.254.0 and 255.255.255.252
  • 255.255.255.128 and 255.255.255.224
  • 255.255.254.0 and 255.255.255.224
  • 255.255.255.0 and 255.255.255.252

125. What is one purpose of the TCP three-way handshake?

  • synchronizing sequence numbers between source and destination in preparation for data transfer
  • determining the IP address of the destination host in preparation for data transfer
  • sending echo requests from the source to the destination host to establish the presence of the destination
  • requesting the destination to transfer a binary file to the source

126. Which type of wireless security is easily compromised?

  • EAP
  • PSK
  • WEP
  • WPA

127. An administrator needs to upgrade the IOS in a router to a version that supports new features. Which factor should the administrator consider before performing the upgrade?

  • NVRAM must be erased before the new IOS can be installed.
  • The old IOS should be backed up to NVRAM so that it is not lost during a power failure.
  • The new IOS might require more RAM to function properly.
  • The old IOS must be removed first.

128. Which two statements describe the characteristics of fiber-optic cabling? (Choose two.)

  • Fiber-optic cabling does not conduct electricity.
  • Fiber-optic cabling has high signal loss.
  • Fiber-optic cabling is primarily used as backbone cabling.
  • Multimode fiber-optic cabling carries signals from multiple sending devices.
  • Fiber-optic cabling uses LEDs for single-mode cab​les and laser technology for multimode cables.

129. A host PC is attempting to lease an address through DHCP. What message is sent by the server to let the client know it is able to use the provided IP information?

  • DHCPDISCOVER
  • DHCPOFFER
  • DHCPREQUEST
  • DHCPACK*
  • DHCPNACK

130. What part of the URL, http://www.cisco.com/index.html, represents the top-level DNS domain?

  • www
  • .com
  • http
  • index

131. A user issues the ipconfig /displaydns command on the workstation. What is the function of this command? 

  • to show all of the cached DNS entries
  • to show the local DNS server parameters
  • to show the result of last name resolution request
  • to show the DNS configuration for the workstation

132. Consider the following range of addresses:

2001:0DB8:BC15:00A0:0000::
2001:0DB8:BC15:00A1:0000::
2001:0DB8:BC15:00A2:0000::
…
2001:0DB8:BC15:00AF:0000::

The prefix-length for the range of addresses is __60__

133. Which publicly available resources describe protocols, processes, and technologies for the Internet but do not give implementation details?

  • protocol models
  • Request for Comments
  • IRTF research papers
  • IEEE standards

134. What information does the loopback test provide?

  • The device has the correct IP address on the network.
  • The Ethernet cable is working correctly.
  • The device has end-to-end connectivity.
  • DHCP is working correctly.
  • The TCP/IP stack on the device is working correctly.

Explanation: Because the loopback test sends packets back to the host device, it does not provide information about network connectivity to other hosts. The loopback test verifies that the host NIC, drivers, and TCP/IP stack are functioning.

135. What are the two main components of Cisco Express Forwarding (CEF)? (Choose two.)

  • adjacency tables
  • ARP tables
  • routing tables
  • forwarding information base (FIB)
  • MAC-address tables

136. Which subnet would include the address 192.168.1.96 as a usable host address?

  • 192.168.1.64/26
  • 192.168.1.32/27
  • 192.168.1.32/28
  • 192.168.1.64/29

137. When applied to a router, which command would help mitigate brute-force password attacks against the router?

  • exec-timeout 30
  • banner motd $Max failed logins = 5$
  • login block-for 60 attempts 5 within 60
  • service password-encryption

138. Which statement best describes the operation of the File Transfer Protocol?

  • An FTP client uses a source port number of 21 and a randomly generated destination port number during the establishment of control traffic with an FTP Server.
  • An FTP client uses a source port number of 20 and a randomly generated destination port number during the establishment of data traffic with an FTP Server.
  • An FTP server uses a source port number of 20 and a randomly generated destination port number during the establishment of control traffic with an FTP client.
  • An FTP server uses a source port number of 21 and a randomly generated destination port number during the establishment of control traffic with an FTP client.

Explanation: When using the File Transfer Protocol, an FTP client uses a randomly generated source port number, but targets a destination port number of 20 or 21 on the FTP server. The destination port numbers depend on whether it is the first connection for control traffic on port 21 or the second connection for data traffic on port 20.

139. What is a characteristic of multicast messages?

  • They are sent to a select group of hosts.
  • They are sent to all hosts on a network.
  • They must be acknowledged.
  • They are sent to a single destination.

Explanation: Multicast is a one-to-many type of communication. Multicast messages are addressed to a specific multicast group.

Two network engineers are discussing the methods used to forward frames through a switch. What is an important concept related to the cut-through method of switching?

  • The fragment-free switching offers the lowest level of latency.
  • Fast-forward switching can be viewed as a compromise between store-and-forward switching and fragment-free switching.
  • Fragment-free switching is the typical cut-through method of switching.
  • Packets can be relayed with errors when fast-forward switching is used.

Explanation: Fast-forward switching offers the lowest level of latency and it is the typical cut-through method of switching. Fragment-free switching can be viewed as a compromise between store-and-forward switching and fast-forward switching. Because fast-forward switching starts forwarding before the entire packet has been received, there may be times when packets are relayed with errors.

Subscribe
Notify of
guest

22 Comments
Inline Feedbacks
View all comments
konstantin p
konstantin p
2 years ago
  • Two network engineers are discussing the methods used to forward frames through a switch. What is an important concept related to the cut-through method of switching?
  • Fragment-free switching is the typical cut-through method of switching.
  • Fast-forward switching can be viewed as a compromise between store-and-forward switching and fragment-free switching.
  • The fragment-free switching offers the lowest level of latency.
  • Packets can be relayed with errors when fast-forward switching is used.
sam V.
sam V.
3 years ago

The indicated answer on 138 does not seem correct to me!
Source port for FTP server for control traffic is 21. The client will be generating a random port number.
So the answer needs to be:

  • An FTP server uses a source port number of 21 and a randomly generated destination port number during the establishment of control traffic with an FTP client.

Anyone to object?

simran
simran
3 years ago

what does the flow control window size of the TCP protocol header indicate?

Steve
Steve
4 years ago

I’ve go this question so you can ad it too.

What is the objective of a network reconnaissance attack?
– discovery and mapping of system

Boris
Boris
4 years ago

Question : What subnet mask is required to support 512 subnets on networks 172.28.0.0/16?

255.255.240.0
255.255.255.224
255.255.255.240
255.255.255.128
✔255.255.252.0

512 subnets and 16 host in each subnet becomes 8192 host. This means 255.255.240.0 is the right answer !

sam
sam
3 years ago
Reply to  Boris

I totally disagree, You assume 16 hosts (actually 14 usable addresses per subnet, but taken that aside). Nowhere this is a specification.
So actually provided is an 172.28.0.0 / 16 range which means a subnetmask of 255.255.0.0
Actually you need to divide this whole range of 65535 available addresses in 512 subnets. So if you mask the third octed only (/24), than you have 256 subnets (0-255) of each 255 addresses (actually 254 hosts cause the last address is the broadcast, and the 0 is the network address). So to have 512 subnets you need to steal the highest bit from the last octed also/ Which gives you /25. This means 512 subnets of 128 address (of which 2 are not usable for hosts. You know why by now)
So /25 means a mask of 255.255.255.128.
Thats’ the correct answer.

Boris
Boris
4 years ago

Is it right that the answer of exercise 53 is 255.255.255.128?
There are 512 subnets and the network is: 172.28.0.0/16. This means there are 512 x 16 = 8192 host, which
means that the subnet mask must be 255.255.240.0. Am I wrong? I hope so. Reaction please

sam
sam
3 years ago
Reply to  Boris

Indeed 255.255.255.128 is the correct answer. You need to take the highest bit of the 4th octed as well in your subnetmask. So thah means that your 4th octed in the mask is 128.
255.255.255.240 is wrong. Since than you last octed would be 1111 0000.
This means 256 x 16 = 4096 subnet of each 16 address (14 usable hosts).
You see?

Study
Study
5 years ago

Are the final exam questions the same

Kate
Kate
5 years ago

Hi are the above questions and answers the exact same as the final exam on netacad for 2019 ?
number 1 – 54 or could the older version questions also appear on the exam ?

thanks

Sad Murshid Khan Adon
Sad Murshid Khan Adon
5 years ago

Question : What subnet mask is required to support 512 subnets on networks 172.28.0.0/16?

255.255.240.0
255.255.255.224
255.255.255.240
255.255.255.128
✔255.255.252.0

Question : A DHCP server is used to IP addresses dynamically to the hosts on a network. The address pool is configured with 10.29.244.0/25. There are 19 printers on this network that need to use reserve static IP addresses from the pool. How many IP address in the pool are left to be assign to other hosts?

210
60
109
✔107
146

sam
sam
3 years ago

126 usuable address – 19 = 107 correct

oma
oma
5 years ago

A technician with a PC is using multiple applications while connected to the Internet. How is the PC able to keep track of the data flow between multiple application sessions and have each application receive the correct packet flows?

The data flow is being tracked based on the source port number that is used by each application.*

The data flow is being tracked based on the destination MAC address of the technician PC.

The data flow is being tracked based on the destination IP address that is used by the PC of the technician.

The data flow is being tracked based on the source IP address that is used by the PC of the technician.

sam
sam
5 years ago

anyone who has good knowledge in subnetting to help me out……

sam V.
sam V.
3 years ago
Reply to  sam

Ok I changed my name, cause otherwise this is getting confusing for other. I’m Sam V.

daipatpat
daipatpat
5 years ago

What is a characteristic of multicast messages?

> They are sent to all hosts on a network.
> They must be acknowledged.
> They are sent to a select group of hosts.
> They are sent to a single destination.

Simiao antonio mondlane
Simiao antonio mondlane
6 years ago

First of all i’d like to thank for having this space.
I’m begginig ccna doing ccna1 and, as in Mozambique we speek portuguise lot of thing in your page i don’t undarstend becouse of the languege. I’d thank if you would create a page with exams and other things in portuguese.

chem
chem
6 years ago

how do we download

Stress
Stress
7 years ago

are the final exam questions will be the same?i though it has 100 questions

Kevin
Kevin
7 years ago

Question What three blocks of addresses are defined by RFC 1918 for private network use? (Choose three.)

IS
172 16 0 0 / 12
192 168 0 0 / 16
10 0 0 0 /8

22
0
Would love your thoughts, please comment.x
()
x