Category: CCNPv8 ENARSI
1. What is the default maximum amount of bandwidth that can be used for exchanging EIGRP messages on an EIGRP-configured interface? 50% 10% 100% 75% 2. If replies are not received from all outstanding queries, how long will an EIGRP router wait before placing a route into the …
1. Which two protocols are allowed to be routed by EIGRP as a consequence of the PDM feature? (Choose two.) IPv4 TCP IPv6 UDP RTP 2. Which bandwidth value is used when calculating the EIGRP metric of a route? the fastest bandwidth of all interfaces on the router …
1. What do devices on the same IPv4 subnet have in common? They all use the same default gateway. They all have a subnet mask of /8, /16, or /24. They all have the same last octet in their IPv4 addresses. They all have the same number in …
23.2.2 Packet Tracer – Explore a NetFlow Implementation (Answers) Topology Objectives Part 1: Observe NetFlow Flow Records – One Direction Part 2: Observe NetFlow Records for a Session that Enters and Leaves the Collector Background In this activity, you will use Packet Tracer to create network traffic and …
23.2.1 Packet Tracer – Logging Network Activity (Answers) Topology Addressing Table Device Private IP Address Public IP Address FTP_Server 192.168.30.253 209.165.200.227 SYSLOG_SERVER 192.168.11.254 209.165.200.229 Router2 N/A 209.165.200.226 Objectives Part 1: Create FTP traffic Part 2: Investigate the FTP Traffic Part 3: View Syslog Messages Background / Scenario In …
22.2.1 Packet Tracer – Configure AAA Authentication on Cisco Routers (Answers) Topology Addressing Table Device Interface IP Address Subnet Mask Default Gateway Switch Port R1 G0/1 192.168.1.1 255.255.255.0 N/A S1 F0/1 S0/0/0 (DCE) 10.1.1.2 255.255.255.252 N/A R2 G0/0 192.168.2.1 255.255.255.0 N/A S2 F0/2 S0/0/0 10.1.1.1 255.255.255.252 N/A S0/0/1 …
21.2.2 Packet Tracer – Configure IPv6 ACLs (Answers) Topology Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only. Addressing Table Device Interface IPv6 Address/Prefix Default Gateway Server3 NIC 2001:DB8:1:30::30/64 FE80::30 Objectives Part 1: Configure, Apply, and Verify an IPv6 ACL …
21.2.1 Packet Tracer – Configure Extended IPv4 ACLs (Answers) Topology Addressing Table Device Interface IP Address Subnet Mask Default Gateway R1 G0/0 172.22.34.65 255.255.255.224 N/A G0/1 172.22.34.97 255.255.255.240 G0/2 172.22.34.1 255.255.255.192 Server NIC 172.22.34.62 255.255.255.192 172.22.34.1 PC1 NIC 172.22.34.66 255.255.255.224 172.22.34.65 PC2 NIC 172.22.34.98 255.255.255.240 172.22.34.97 Objectives Part …
20.2.1 Packet Tracer – Configure and Verify a Site-to-Site IPsec VPN Using CLI (Answers) Topology Addressing Table Device Interface IP Address Subnet Mask Default Gateway Switch Port R1 G0/0 192.168.1.1 255.255.255.0 N/A S1 F0/1 S0/0/0 (DCE) 10.1.1.2 255.255.255.252 N/A R2 G0/0 192.168.2.1 255.255.255.0 N/A S2 F0/2 S0/0/0 10.1.1.1 …
19.2.1 Packet Tracer – Configure GRE (Answers) Topology Addressing Table Device Interface IP Address Subnet Mask Default Gateway RA G0/0 192.168.1.1 255.255.255.0 N/A S0/0/0 64.103.211.2 255.255.255.252 Tunnel 0 10.10.10.1 255.255.255.252 RB G0/0 192.168.2.1 255.255.255.0 N/A S0/0/0 209.165.122.2 255.255.255.252 Tunnel 0 10.10.10.2 255.255.255.252 PCA NIC 192.168.1.2 255.255.255.0 192.168.1.1 PCB …