Category: CCNPv8 ENARSI
CCNP Enterprise: Advanced Routing (Version 8.0) – CCNP ENARSI (300-410) Certification Practice Exam 1. Refer to the exhibit. Routers R1 and R2 enable EIGRP on all of their interfaces. Which two conclusions can the field engineer draw from the outputs of the show ip route eigrp command on …
CCNP Enterprise: Advanced Routing (Version 8.0) – Infrastructure Security and Management Exam 1. Which two characteristics are shared by both standard and extended ACLs? (Choose two.) Both kinds of ACLs can filter based on protocol type. Both can be created by using either a descriptive name or number. …
CCNP Enterprise: Advanced Routing ( Version 8.0) – VPNs Exam 1. An network administrator has created VRF instances on a router and assigned interfaces to the VRF instances. What command can the administrator issue to verify what IP address is assigned to the interface, what VRF instance the …
CCNP Enterprise: Advanced Routing (Version 8.0) – Conditional Forwarding and Route Redistribution Exam 1. Which three statements describe ACL processing of packets? (Choose three.) Each packet is compared to the conditions of every statement in the ACL before a forwarding decision is made. A packet can either be …
CCNP Enterprise: Advanced Routing (Version 8.0) – BGP Exam 1. Refer to the exhibit. Autonomous system 65500 is routing traffic between two external BGP autonomous systems, autonomous system 65200 and autonomous system 65100. Synchronization is disabled on BGP in autonomous system 65500. Which routers should have IBGP peer …
CCNP Enterprise: Advanced Routing (Version 8.0) – OSPF Exam 1. Which two commands will configure OSPFv2 MD5 authentication on a router interface? (Choose two.) default-information originate area 0 authentication message-digest ip ospf authentication message-digest router ospf 10 ip ospf message-digest-key 1 md5 CISCO-ABC ip ospf priority 255 2. …
CCNP Enterprise: Advanced Routing (Version 8.0) – Routing Concepts and EIGRP Exam 1. Refer to the exhibit. What address should be configured on PC1 as its default gateway so that PC1 can communicate with File_server1? 172.16.100.1 209.165.200.225 209.165.200.226 172.16.0.254 172.16.0.1 2. What would be the interface ID of …
16.1.4 Lab – Configure Route Redistribution Using BGP (Answers) Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only. Topology Addressing Table Device Interface IP Address Subnet Mask R1 G0/0/0 10.1.12.1 255.255.255.0 G0/0/1 10.1.11.1 255.255.255.0 Loopback 0 10.1.1.1 255.255.255.0 R2 …
16.1.3 Lab – Configure Route Redistribution Within the Same Interior Gateway Protocol (Answers) Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only. Topology Addressing Table Device Interface IP Address Subnet Mask R1 G0/0/0 10.1.12.1 255.255.255.0 G0/0/1 10.1.11.1 255.255.255.0 Loopback 0 …
16.1.2 Lab – Configure Route Redistribution Between EIGRP and OSPF (Answers) Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only. Topology Addressing Table Device Interface IPv4 Address/Mask IPv6 Address/Prefix IPv6 Link Local R1 G0/0/0 10.1.12.1/24 2001:db8:acad:12::1/64 fe80::12:1 G0/0/1 10.1.11.1/24 2001:db8:acad:11::1/64 …