Category: CCNPv8 ENCOR
15.2.1 Packet Tracer – Configure and Verify NTP (Answers) Topology Addressing Table Device Interface IP Address Subnet Mask N1 NIC 209.165.200.225 255.255.255.0 R1 G0/0 209.165.200.226 255.255.255.0 R2 G0/0 209.165.200.227 255.255.255.0 Objectives In this activity, you will configure NTP on R1 and R2 to allow time synchronization. Background / …
11.2.1 Packet Tracer – Configure and Verify eBGP (Answers) Topology Objectives Configure and verify eBGP between two autonomous systems. Background / Scenario In this activity, you will configure and verify the operation of eBGP between autonomous systems 65001 and 65002. ACME Inc. is a company that has a …
10.2.1 Packet Tracer – Configure Multiarea OSPFv3 (Answers) Topology Addressing Table Device Interface IPv6 Address OSPF Area RA G0/0 2001:db8:1:a1::1/64 1 G0/1 2001:db8:1:a2::1/64 1 S0/0/0 2001:db8:1:ab::2/64 0 Link-Local fe80::a N/A RB G0/0 2001:db8:1:b1::1/64 0 S0/0/0 2001:db8:1:ab::1/64 0 S0/0/1 2001:db8:1:bc::1/64 0 Link-Local fe80::b N/A RC G0/0 2001:db8:1:c1::1/64 2 G0/1 …
9.2.2 Packet Tracer – Configure OSPF Advanced Features (Answers) Topology Addressing Table Device Interface IPv4 Address Subnet Mask Default Gateway R1 G0/0 172.16.1.1 255.255.255.0 N/A S0/0/0 172.16.3.1 255.255.255.252 N/A S0/0/1 192.168.10.5 255.255.255.252 N/A R2 G0/0 172.16.2.1 255.255.255.0 N/A S0/0/0 172.16.3.2 255.255.255.252 N/A S0/0/1 192.168.10.9 255.255.255.252 N/A S0/1/0 209.165.200.225 …
9.2.1 Packet Tracer – Implement Multiarea OSPFv2 (Answers) Topology Addressing Table Device Interface IP Address Subnet Mask OSPFv2 Area R1 G0/0 10.1.1.1 255.255.255.0 1 G0/1 10.1.2.1 255.255.255.0 1 S0/0/0 192.168.10.2 255.255.255.252 0 R2 G0/0 10.2.1.1 255.255.255.0 0 S0/0/0 192.168.10.1 255.255.255.252 0 S0/0/1 192.168.10.5 255.255.255.252 0 R3 G0/0 192.168.2.1 …
8.2.1 Packet Tracer – Configure OSPFv2 in a Single Area (Answers) Topology Addressing Table Device Interface IP Address Subnet Mask R1 G0/0 172.16.1.1 255.255.255.0 S0/0/0 172.16.3.1 255.255.255.252 S0/0/1 192.168.10.5 255.255.255.252 R2 G0/0 172.16.2.1 255.255.255.0 S0/0/0 172.16.3.2 255.255.255.252 S0/0/1 192.168.10.9 255.255.255.252 R3 G0/0 192.168.1.1 255.255.255.0 S0/0/0 192.168.10.6 255.255.255.252 S0/0/1 …
6.2.1 Packet Tracer – Configure IPv4 and IPv6 Static and Default Routes (Answers) Topology Addressing Table Device Interface IP Address / Prefix Edge_Router S0/0/0 10.10.10.2/30 2001:db8:a:1::2/64 S0/0/1 10.10.10.6/30 2001:db8:a:2::2/64 G0/0 192.168.10.17/28 2001:db8:1:10::1/64 G0/1 192.168.11.33/27 2001:db8:1:11::1/64 ISP1 S0/0/0 10.10.10.1/30 2001:db8:a:1::1/64 G0/0 198.0.0.1/24 2001:db8:f:f::1/64 ISP2 S0/0/1 10.10.10.5/30 2001:db8:a:2::1/64 G0/0 198.0.0.2/24 …
5.2.2 Packet Tracer – Configure EtherChannel (Answers) Topology Objectives Part 1: Configure Basic Switch Settings Part 2: Configure an EtherChannel with Cisco PAgP Part 3: Configure an 802.3ad LACP EtherChannel Part 4: Configure a Redundant EtherChannel Link Background Three switches have just been installed. There are redundant uplinks …
5.2.1 Packet Tracer – Configure VTP and DTP (Answers) Topology Addressing Table Device Interface IP Address Subnet Mask PC0 NIC 192.168.10.1 255.255.255.0 PC1 NIC 192.168.20.1 255.255.255.0 PC2 NIC 192.168.30.1 255.255.255.0 PC3 NIC 192.168.30.2 255.255.255.0 PC4 NIC 192.168.20.2 255.255.255.0 PC5 NIC 192.168.10.2 255.255.255.0 S1 VLAN 99 192.168.99.1 255.255.255.0 S2 …
2.2.1 Packet Tracer – Observe STP Topology Changes (Answers) Topology Objectives Part 1: Check for STP Convergence Part 2: Examine the ARP Process Part 3: Test Redundancy in a Switched Network Background In this activity, you will observe how STP operates, by default, and how it reacts when …
