An engineer has deployed a single Cisco 5520 WLC with a management IP address of 172.16.50.5/24. The engineer must register 50 new Cisco AIR-CAP2802I-E-K9 access points to the WLC using DHCP option 43. The access points are connected to a switch in VLAN 100 that uses the 172.16.100.0/24 subnet. The engineer has configured the DHCP scope on the switch as follows: The access points are failing to join the wireless LAN controller. Which action resolves the issue?

January 25, 2021 Last Updated: January 25, 2021 No Comments
Tweet Share Pin it
IT Questions Bank › Category: CCNP › An engineer has deployed a single Cisco 5520 WLC with a management IP address of 172.16.50.5/24. The engineer must register 50 new Cisco AIR-CAP2802I-E-K9 access points to the WLC using DHCP option 43. The access points are connected to a switch in VLAN 100 that uses the 172.16.100.0/24 subnet. The engineer has configured the DHCP scope on the switch as follows: The access points are failing to join the wireless LAN controller. Which action resolves the issue?
0
Vote Up
Vote Down
An engineer has deployed a single Cisco 5520 WLC with a management IP address of 172.16.50.5/24. The engineer must register 50 new Cisco AIR-CAP2802I-E-K9 access points to the WLC using DHCP option 43. The access points are connected to a switch in VLAN 100 that uses the 172.16.100.0/24 subnet. The engineer has configured the DHCP scope on the switch as follows: The access points are failing to join the wireless LAN controller. Which action resolves the issue? 1ITExamAnswers Staff asked 3 months ago

Question:
An engineer has deployed a single Cisco 5520 WLC with a management IP address of 172.16.50.5/24. The engineer must register 50 new Cisco AIR-CAP2802I-E-K9 access points to the WLC using DHCP option 43. The access points are connected to a switch in VLAN 100 that uses the 172.16.100.0/24 subnet. The engineer has configured the DHCP scope on the switch as follows:
An engineer has deployed a single Cisco 5520 WLC with a management IP address of 172.16.50.5/24. The engineer must register 50 new Cisco AIR-CAP2802I-E-K9 access points to the WLC using DHCP option 43. The access points are connected to a switch in VLAN 100 that uses the 172.16.100.0/24 subnet. The engineer has configured the DHCP scope on the switch as follows: The access points are failing to join the wireless LAN controller. Which action resolves the issue? 2
The access points are failing to join the wireless LAN controller. Which action resolves the issue?

  • A. configure option 43 Hex F104.AC10.3205
  • B. configure option 43 Hex F104.CA10.3205
  • C. configure dns-server 172.16.50.5
  • D. configure dns-server 172.16.100.1

More Questions: CCNP 350-401 Dumps


Related Articles