The exhibit shows two PCs called PC A and PC B, two routes called R1 and R2, and two switches. PC A has the address 172.16.1.1/24 and is connected to a switch and into an interface on R1 that has the IP address 172.16.1.254. PC B has the address 172.16.2.1/24 and is connected to a switch that is connected to another interface on R1 with the IP address 172.16.2.254. The serial interface on R1 has the address 172.16.3.1 and is connected to the serial interface on R2 that has the address 172.16.3.2/24. R2 is connected to the internet cloud. Which command will create a static route on R2 in order to reach PC B?

Questions BankThe exhibit shows two PCs called PC A and PC B, two routes called R1 and R2, and two switches. PC A has the address 172.16.1.1/24 and is connected to a switch and into an interface on R1 that has the IP address 172.16.1.254. PC B has the address 172.16.2.1/24 and is connected to a switch that is connected to another interface on R1 with the IP address 172.16.2.254. The serial interface on R1 has the address 172.16.3.1 and is connected to the serial interface on R2 that has the address 172.16.3.2/24. R2 is connected to the internet cloud. Which command will create a static route on R2 in order to reach PC B?
ITExamAnswers Staff asked 4 months ago
Question:
The exhibit shows two PCs called PC A and PC B, two routes called R1 and R2, and two switches. PC A has the address 172.16.1.1/24 and is connected to a switch and into an interface on R1 that has the IP address 172.16.1.254. PC B has the address 172.16.2.1/24 and is connected to a switch that is connected to another interface on R1 with the IP address 172.16.2.254. The serial interface on R1 has the address 172.16.3.1 and is connected to the serial interface on R2 that has the address 172.16.3.2/24. R2 is connected to the internet cloud. Which command will create a static route on R2 in order to reach PC B?

  • R2(config)# ip route 172.16.2.1 255.255.255.0 172.16.3.1
  • R2(config)# ip route 172.16.2.0 255.255.255.0 172.16.2.254
  • R2(config)# ip route 172.16.2.0 255.255.255.0 172.16.3.1
  • R2(config)# ip route 172.16.3.0 255.255.255.0 172.16.2.254

Explanation: The correct syntax is:
router(config)# ip route destination-network destination-mask {next-hop-ip-address | exit-interface}
If the local exit interface instead of the next-hop IP address is used then the route will be displayed as a directly connected route instead of a static route in the routing table. Because the network to be reached is 172.16.2.0 and the next-hop IP address is 172.16.3.1, the command is R2(config)# ip route 172.16.2.0 255.255.255.0 172.16.3.1

More Questions: Switching, Routing, and Wireless Essentials ( Version 7.00) – SRWE Final Exam
More Questions: CCNA 2 (v5.0.3 + v6.0) Final Exam Answers

[kkstarratings force="false" valign="bottom" align="left"]

Related Articles