A switch has the following command issued as part of an 802.1X deployment. address ipv4 10.1.1.50 auth-port 1812 acct-port 1813 What is the purpose of this command?

IT Questions BankCategory: CCNA SecurityA switch has the following command issued as part of an 802.1X deployment. address ipv4 10.1.1.50 auth-port 1812 acct-port 1813 What is the purpose of this command?

A switch has the following command issued as part of an 802.1X deployment.

address ipv4 10.1.1.50 auth-port 1812 acct-port 1813

What is the purpose of this command?

  • It identifies the address of the default gateway and the ports used for traffic destined for remote networks.
  • It identifies the address of the RADIUS server and ports on the server used for RADIUS traffic.
  • It identifies the address of the RADIUS server and the ports used for EAPOL messages.
  • It identifies the address of the switch to which the client connects and the ports used for the EAPOL messages.

Explanation: When using 802.1x authentication, a switch must be configured with the IP address of the RADIUS server, and the port numbers used to communicate with the authentication server.

Exam with this question: Module 13: Quiz – Endpoint Security Network Security

Subscribe
Notify of
guest

0 Comments
Inline Feedbacks
View all comments