IT Questions Bank Mar 16, 2020 Last Updated: Jun 29, 2023 No Comments Share Tweet Share Pin it IT Questions Bank › Category: CCNAA PC is downloading a large file from a server. The TCP window is 1000 bytes. The server is sending the file using 100-byte segments. How many segments will the server send before it requires an acknowledgment from the PC?ITExamAnswers asked 4 years ago • CCNA, CCNA CyberOpsRefer to the exhibit. A network administrator is configuring access control to switch SW1. If the administrator uses a console connection to connect to the switch, which password is needed to access user EXEC mode?ITExamAnswers asked 4 years ago • CCNARefer to the exhibit. A network administrator has configured router CiscoVille with the above commands to provide inter-VLAN routing. What type of port will be required on a switch that is connected to Gi0/0 on router CiscoVille to allow inter-VLAN routing?ITExamAnswers asked 4 years ago • CCNARefer to the exhibit. All workstations are configured correctly in VLAN 20. Workstations that are connected to switch SW1 are not able to send traffic to workstations on SW2. What could be done to remedy the problem?ITExamAnswers asked 4 years ago • CCNAMatch the IPv6 address with the IPv6 address type. (Not all options are used.)ITExamAnswers asked 4 years ago • CCNAFor the TCP/IP protocol suite, what is the correct order of events when a Telnet message is being prepared to be sent over the network?ITExamAnswers asked 4 years ago • CCNARefer to the exhibit. A user PC has successfully transmitted packets to www.cisco.com. Which IP address does the user PC target in order to forward its data off the local network?ITExamAnswers asked 4 years ago • CCNAMatch the situation with the appropriate use of network media.ITExamAnswers asked 4 years ago • CCNAA network administrator requires access to manage routers and switches locally and remotely. Match the description to the access method. (Not all options are used.)ITExamAnswers asked 4 years ago • CCNARefer to the exhibit. What is the destination MAC address of the Ethernet frame as it leaves the web server if the final destination is PC1?ITExamAnswers asked 4 years ago • CCNAWhen routing a large number of VLANs, what are two disadvantages of using the router-on-a-stick inter-VLAN routing method rather than the multilayer switch inter-VLAN routing method? (Choose two.)ITExamAnswers asked 4 years ago • CCNAA ping fails when performed from router R1 to directly connected router R2. The network administrator then proceeds to issue the show cdp neighbors command. Why would the network administrator issue this command if the ping failed between the two routers?ITExamAnswers asked 4 years ago • CCNAMatch the IEEE 802.1Q standard VLAN tag field with the description. (Not all options are used.)ITExamAnswers asked 4 years ago • CCNARefer to the exhibit. A router-on-a-stick configuration was implemented for VLANs 15, 30, and 45, according to the show running-config command output. PCs on VLAN 45 that are using the 172.16.45.0 /24 network are having trouble connecting to PCs on VLAN 30 in the 172.16.30.0 /24 network. Which error is most likely causing this problem?ITExamAnswers asked 4 years ago • CCNAA high school uses VLAN15 for the laboratory network and VLAN30 for the faculty network. What is required to enable communication between these two VLANs while using the router-on-a-stick approach?ITExamAnswers asked 4 years ago • CCNA