A Layer 3 switch has been configured to route IP packets between VLANs 1, 2, and 3 using SVIs, which connect to subnets 172.20.1.0/25, 172.20.2.0/25, and 172.20.3.0/25, respectively. The engineer issues a show ip route connected command on the Layer 3 switch, listing the connected routes. Which of the following answers lists a piece of information that should be in at least one of the routes?
- Interface Gigabit Ethernet 0/0.3
- Next-hop router 172.20.2.1
- Interface VLAN 2
- Mask 255.255.255.0
Explanation: The configuration of the Layer 3 switch’s routing feature uses VLAN interfaces. The VLAN interface numbers must match the associated VLAN ID, so with VLANs 1, 2, and 3 in use, the switch will configure interface vlan 1, interface vlan 2 (which is the correct answer), and interface vlan 3. The matching connected routes, like all connected IP routes, will list the VLAN interfaces.
As for the incorrect answers, a list of connected routes will not list any next-hop IP addresses. Each route will list an outgoing interface; the outgoing interface will not be a physical interface, but rather a VLAN interface, because the question states that the configuration uses SVIs. Finally, all the listed subnets have a /25 mask, which is 255.255.255.128, so none of the routes will list a 255.255.255.0 mask.
Please login or Register to submit your answer