- Set the DCE interface to a lower clock rate.
- Use the bandwidth command to increase the bandwidth of the link.
- Issue the command ppp quality 100.
- Issue the command ppp quality 70.
Explanation: Issuing the ppp quality 70 command will reduce the link quality threshold before it shuts down from 90% of packets received that were sent, to a drop rate of 70% before shutting down. Setting the threshold to 100% will shut down the link if 100% of packets are not received. Lowering the clock rate will not help a link that is going down. The bandwidth command is used for routing protocol calculations, not link quality.
More Questions: CCNA 4 Chapter 2 Exam Answers