A switch is participating in a VTP domain and configured as a VTP server. The switch needs to propagate VLAN 10 (used by the Manufacturing department) throughout the VTP domain, but does not have any directly connected hosts using that particular VLAN. Which configuration would satisfy this requirement?

IT Questions Bank › A switch is participating in a VTP domain and configured as a VTP server. The switch needs to propagate VLAN 10 (used by the Manufacturing department) throughout the VTP domain, but does not have any directly connected hosts using that particular VLAN. Which configuration would satisfy this requirement?

interface fa0/24
switchport mode access
switchport access vlan 10
vlan 10
name Manufacturing
exit
vtp mode server
vtp password Manufacturing
interface g0/1
switchport mode trunk
switchport trunk native vlan 10

Explanation: The best practice to add a VLAN to the VLAN database with no local hosts to be in that VLAN is to configure that VLAN (vlan 10) with its name (name Manufacturing) and use the exit command to complete the configuration. Do not assign any switch interfaces to that VLAN.

Exam with this question: CCNA 3 (v5.0.3 + v6.0) Chapter 2 Exam Answers