Refer to the following configuration: Which host or hosts will have their addresses translated by NAT?

Refer to the following configuration:

R1(config)# ip nat inside source static 192.168.0.100 209.165.200.2
R1(config)# interface serial0/0/0
R1(config-if)# ip nat inside
R1(config-if)# no shut
R1(config-if)# ip address 10.1.1.2 255.255.255.0
R1(config)# interface serial0/0/2
R1(config-if)# ip address 209.165.200.2 255.255.255.0
R1(config-if)# ip nat outside
R1(config-if)# no shut

Which host or hosts will have their addresses translated by NAT?

• 10.1.1.2
• 192.168.0.100
• 209.165.200.2
• All hosts on the 10.1.1.0 network
• All hosts on the 192.168.0.0 network

Explanation: IP address 192.168.0.100 is the inside local address and will be translated into 209.165.200.2.

Exam with this question: EWAN v4 Chapter 7 Check Your Understanding: IP Addressing Services
Exam with this question: CCNA 4 Exploration v4.0 Chapter 7 Quiz