R1(config-if)# encapsulation ppp R1(config-if)# ppp quality 70
What is the effect of these commands?
- The NCP will send a message to the sending device if the link usage reaches 70 percent.
- The PPP link will not be established if more than 30 percent of options cannot be accepted.
- The LCP establishment phase will not start until the bandwidth reaches 70 percent or more.
- The PPP link will be closed down if the link quality drops below 70 percent.
Explanation: LCP provides an option to monitor the link quality. The command ppp quality percentage ensures that the link meets the quality requirement set; otherwise the link closes down.
More Questions: CCNA 4 Pretest Exam Answers