Refer to the exibit. Both routers are configured to use the EIGRP routing protocol. The network administrator wants to enable manual summarization by issuing the displayed command. Where should the administrator apply this command?

IT Questions BankCategory: CCNPRefer to the exibit. Both routers are configured to use the EIGRP routing protocol. The network administrator wants to enable manual summarization by issuing the displayed command. Where should the administrator apply this command?

Refer to the exibit. Both routers are configured to use the EIGRP routing protocol. The network administrator wants to enable manual summarization by issuing the displayed command. Where should the administrator apply this command?

  • in router configuration mode after entering the router eigrp 100 command
  • in interface mode on the Gi0/1 interface of R1
  • in interface mode on the S0/0/0 interface of R1
  • in interface mode on the S0/0/0 interface of R2

Explanation: EIGRP summarizes network prefixes on an interface-by-interface basis. A summary aggregate is configured for the EIGRP interface. Without summarization, R1 advertises 192.168.10.0/24, 192.168.20.0/24, 192.168.30.0/24, and 192.168.40.0/24. R1 summarizes these network prefixes to the summary aggregate 192.168.0.0/16 prefix so that only one advertisement is sent to R2. Therefore, the command has to be applied to the serial0/0/0 interface of R1.

Exam with this question: Quiz – Advanced EIGRP (Answers) CCNPv8 ENARSI

Subscribe
Notify of
guest

0 Comments
Inline Feedbacks
View all comments