CCNA Security v2.0 Chapter 10 Test Online

1. Question

1 points

Which statement describes the function provided to a network administratorwho uses the Cisco Adaptive Security Device Manager (ASDM) GUI that runs as a Java Web Start application?

The administrator can connect to and manage a single ASA.
The administrator can connect to and manage multiple ASA devices.
The administrator can connect to and manage multiple ASA devices and Cisco routers.
The administrator can connect to and manage multiple ASA devices, Cisco routers, and Cisco switches.

2. Question

1 points

What is one benefit of using ASDM compared to using the CLI to configure the Cisco ASA?

It does not require any initial device configuration.
It hides the complexity of security commands.
ASDM provides increased configuration security.
It does not require a remote connection to a Cisco device.

3. Question

1 points

Which type of security is required for initial access to the Cisco ASDM by using the local application option?

SSL
WPA2 corporate
biometric
AES

4. Question

1 points

Which minimum configuration is required on most ASAs before ASDM can be used?

SSH
a dedicated Layer 3 management interface
a logical VLAN interface and an Ethernet port other than 0/0
Ethernet 0/0

5. Question

1 points

What must be configured on an ASA before it can be accessed by ASDM?

web server access
Telnet or SSH
an Ethernet port other than 0/0
Ethernet 0/0 IP address

6. Question

1 points

How is an ASA interface configured as an outside interface when using ASDM?

Select a check box from the Interface Type option that shows inside, outside, and DMZ.
Select outside from the Interface Type drop-down menu.
Enter the name “outside” in the Interface Name text box.
Drag the interface to the port labeled “outside” in the ASA drawing.

7. Question

1 points

Refer to the exhibit. Which Device Management menu item would be used to access theASA command line from within Cisco ASDM?

Licensing
System Image/Configuration
Management Access
Advanced

8. Question

1 points

Which ASDM configuration option is used to configure the ASA enable secret password?

Device Setup
Monitoring
Interfaces
Device Management

9. Question

1 points

Refer to the exhibit. Which Device Setup ASDM menu option would be used to configure the ASA for an NTP server?

Startup Wizard
Device Name/Password
Routing
Interfaces
System Time

10. Question

1 points

True or False? The ASA can be configured through ASDM as a DHCP server.

false
true

11. Question

1 points

Which ASDM interface option would be used to configure an ASA as a DHCP server for local corporate devices?

DMZ
outside
local
inside

12. Question

1 points

Which ASDM configuration option re-encrypts all shared keys and passwords on an ASA?

security master
super encryption
master passphrase
device protection

13. Question

1 points

Which type of encryption is applied to shared keys and passwords when the master passphrase option is enabled through ASDM for an ASA?

3DES
public/private key
AES
128-bit

14. Question

1 points

When the CLI is used to configure an ISR for a site-to-site VPN connection, which two items must be specified to enable a crypto map policy? (Choose two.)

the hash
the peer
encryption
the ISAKMP policy
a valid access list
IP addresses on all active interfaces

15. Question

1 points

What is the purpose of the ACL in the configuration of an ISR site-to-site VPN connection?

to permit only secure protocols
to log denied traffic
to identify the peer
to define interesting traffic

16. Question

1 points

When ASDM is used to configure an ASA site-to-site VPN, what can be customized to secure traffic?

ISAKMP
IKE
IKE and ISAKMP
preshared key

17. Question

1 points

Which VPN solution allows the use of a web browser to establish a secure, remote-access VPN tunnel to the ASA?

clientless SSL
site-to-site using an ACL
site-to-site using a preshared key
client-based SSL

18. Question

1 points

Which remote-access VPN connection allows the user to connect by using a web browser?

IPsec (IKEv2) VPN
site-to-site VPN
clientless SSL VPN
IPsec (IKEv1) VPN

19. Question

1 points

Which remote-access VPN connection allows the user to connect using Cisco AnyConnect?

IPsec (IKEv2) VPN
site-to-site VPN
clientless SSL VPN
IPsec (IKEv1) VPN

20. Question

1 points

Which statement describes available user authentication methods when using an ASA 5505 device?

The ASA 5505 can use either a AAA server or a local database.
The ASA 5505 only uses a AAA server for authentication.
The ASA 5505 only uses a local database for authentication.
The ASA 5505 must use both a AAA server and a local database.

21. Question

1 points

Which remote-access VPN connection needs a bookmark list?

IPsec (IKEv1) VPN
IPsec (IKEv2) VPN
site-to-site VPN
clientless SSL VPN

22. Question

1 points

What occurs when a user logs out of the web portal on a clientless SSL VPN connection?

The browser cache is cleared.
Downloaded files are deleted.
The user no longer has access to the VPN.
The web portal times out.

23. Question

1 points

If an outside host does not have the Cisco AnyConnect client preinstalled, how would the host gain access to the client image?

The host initiates a clientless connection to a TFTP server to download the client.
The host initiates a clientless VPN connection using a compliant web browser to download the client.
The Cisco AnyConnect client is installed by default on most major operating systems.
The host initiates a clientless connection to an FTP server to download the client.

24. Question

1 points

What is an optional feature that is performed during the Cisco AnyConnect Secure Mobility Client VPN establishment phase?

security optimization
host-based ACL installation
posture assessment
quality of service security

25. Question

1 points

Which item describes secure protocol support provided by Cisco AnyConnect?

neither SSL nor IPsec
SSL only
both SSL and IPsec
IPsec only

26. Question

1 points

What is the purpose of configuring an IP address pool to be used for client-based SSL VPN connections?

to assign addresses to the interfaces on the ASA
to identify which users are allowed to download the client image
to assign IP addresses to clients when they connect
to identify which clients are allowed to connect

CCNA Security v2.0 Chapter 10 Test Online

Quiz-summary

Information

Results

Categories

1. Question

2. Question

3. Question

4. Question

5. Question

6. Question

7. Question

8. Question

9. Question

10. Question

11. Question

12. Question

13. Question

14. Question

15. Question

16. Question

17. Question

18. Question

19. Question

20. Question

21. Question

22. Question

23. Question

24. Question

25. Question

26. Question

About The Author

ITExam Editorial Team

Average score
Your score