Refer to the exhibit. Router R1 was configured by a network administrator to use SNMP version 2. The following commands were issued: Why is the administrator not able to get any information from R1?

Refer to the exhibit. Router R1 was configured by a network administrator to use SNMP version 2. The following commands were issued:

R1(config)# snmp-server community batonaug ro SNMP_ACL
R1(config)# snmp-server contact Wayne World
R1(config)# snmp-server host 192.168.1.3 version 2c batonaug
R1(config)# ip access-list standard SNMP_ACL
R1(config-std-nacl)# permit 192.168.10.3

Why is the administrator not able to get any information from R1?

• The snmp-server enable traps command is missing.
• There is a problem with the ACL configuration.
• The snmp-server community command needs to include the rw keyword.
• The snmp-server location command is missing.

Explanation: The permit statement with the incorrect IP address is the reason why the administrator is not able to access router R1. The correct statement should be permit 192.168.1.3. The snmp-server location and snmp-server enable traps commands are optional commands and have no relation to the access restriction to router R1. The rw keyword does not need to be included in this case because the administrator just wants to obtain information, not change any configuration.

Exam with this question: CCNA 4 Chapter 5 Exam Answers
Exam with this question: CCNP ENARSI v8 Certification Practice Exam
Exam with this question: CCNP ENARSI 8 Course Final Exam Answers