2.1.2.5 Lab – Install the Power Supply (Answers) – IT Essentials 7.0

2.1.2.5 Lab – Install the Power Supply

Instructor Note: Red font color or gray highlights indicate text that appears in the Instructor copy only.

Introduction

In this lab, you will install a power supply in a computer case.

  • Power supply with a compatible form factor to the computer case
  • Computer case
  • Tool kit
  • Power supply screws

Instructions

Step 1: Open the Computer Case.

a: Remove the screws from the side panels.

b: Remove the side panels from the computer case.

Step 2: Install the Power Supply.

a: Align the screw holes in the power supply with the screw holes in the case.

b: Secure the power supply to the case with the power supply screws.

c: If the power supply has a voltage selection switch, set this switch to match the voltage in your area.

Questions:

What is the voltage in your area?

Answers may vary. Either 110/115v or 220/230v.

How many screws secure the power supply in the case?

Answers may vary. Usually four.

What is the total wattage of the power supply?

Answers may vary.

d: This lab is complete. Please ask the instructor to verify your work.

Subscribe
Notify of
guest

0 Comments
Inline Feedbacks
View all comments