Month: May 2026
Lab - CML Setup (Answers) Topology Background / Scenario The objective of this lab is to install, configure, and validate a fully functional instance of Cisco Modeling Labs (CML-Free) on a local workstation. The lab will use VMware Workstation Pro or VMware Fusion as the virtualization hypervisor. You …
Lab - Configure Cisco IOS EEM (Answers) Topology Addressing Table Device Interface IPv4 Address R1 G0/0/1 192.168.1.1/24 D1 VLAN 1 192.168.1.2/24 Objectives Part 1: Build the Network and Configure Basic Device Settings and Interface Addressing Part 2: Configure, Verify, and Test Cisco IOS EEM Applets Background / Scenario …
Lab - Implement and Tune EtherChannel (Answers) Topology Objectives Part 1: Build the Network and Explore Dynamic Trunking Protocol Part 2: Configure Static EtherChannel Part 3: Implement EtherChannel Using PAgP Part 4: Implement EtherChannel Using LACP Part 5: Tune LACP-based EtherChannels Part 6: Explore EtherChannel Load Balancing Background …
Lab - Implement RSTP and Advanced STP Modifications (Answers) Topology Addressing Table Device Interface IPv4 Address D1 VLAN1 10.0.0.1/8 D2 VLAN1 10.0.0.2/8 A1 VLAN1 10.0.0.3/8 PC1 NIC 10.0.0.4/8 Objectives Part 1: Build the Network and Configure Basic Device Settings Part 2: Observe STP Convergence and Topology Change Part …
