Author: ITExamAnswers Editorial Team
The ITExamAnswers Editorial Team is a dedicated group of certified IT professionals and network engineers. We rigorously review, verify, and update all exam materials to ensure you receive the most accurate and reliable resources for your certification journey.
Command Ctrl – e Use Moves cursor to end of current line in console. Syntax Ctrl + E
Command Esc – b Use Moves cursor back one word in the console. Syntax Esc, then ‘B’ character.
Command Return (at –More– prompt) Use Displays one more line of output at the ‘–More–‘ prompt. Syntax Hit ‘Return’ key at ‘–More–‘ prompt. Example First, the show run command is executed, which has a very large output. CopyR2#show run Building configuration…Current configuration : 1249 bytes ! version 12.4 service timestamps …
Command Ctrl – Y Use Recalls the most recent entry in the delete buffer. Syntax Ctrl + Y Example First, a command is typed in the console. CopyR2(config)#show run | sec router Next, ctrl – x is used to delete the entire line. In its place, the user types do. CopyR2(config)#do …
Command Ctrl – U, Ctrl – X Use Clears all of the line behind the cursor in the console. Syntax Ctrl + U OR Ctrl + X
Command ESC – d Use Deletes any full word ahead of the cursor in the command console. Syntax ESC, then ‘d’ character Example For example, after typing the following command, the cursor is navigated to the beginning of the line, highliting the ‘s’. CopyR4(config)#show ip route After using ESC, …
Command Ctrl – A Use Moves cursor to the beginning of the line in the command console. Syntax ctrl + A
Command Ctrl – F Use Advances the cursor one character forward in the command console. Syntax ctrl + f
Command Tab Use Allows users to complete commands that have not been fully typed. This hotkey is useful if you happen to forget the spelling of a command. Syntax Tab key Example In this example, the user uses the Tab key to complete a command. Notice that, after hitting Tab, a …
Command Show Interface Use Displays interface status on the switch. Syntax Switch#show interface Or Switch#show interface <int> Example In this example, the interface information is shown for fa0/2 on SW3. CopySW3#show interface fa0/2 FastEthernet0/2 is down, line protocol is down (err-disabled) Hardware is Fast Ethernet, address is 0019.060c.9404 (bia …