Show VTP Status Command on CISCO Router/Switch

Command

Show VTP Status

Use

Displays VTP information on the switch.

Syntax

Show# show vtp status

Example

Here is the output of the VTP status on SW3.

SW3# show vtp status
VTP Version : 2
Configuration Revision : 23
Maximum VLANs supported locally : 1005
Number of existing VLANs : 19
VTP Operating Mode : Server
VTP Domain Name : howtonetwork.net
VTP Pruning Mode : Enabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x46 0x61 0xA6 0xC8 0x1F 0x9B 0x64 0x6A
Configuration last modified by 0.0.0.0 at 3-1-93 01:34:49
Local updater ID is 10.10.0.2 on interface Vl55 (lowest numbered VLAN interface found)

Related Articles

Leave a Reply

avatar