Author: ITExamAnswers Editorial Team
The ITExamAnswers Editorial Team is a dedicated group of certified IT professionals and network engineers. We rigorously review, verify, and update all exam materials to ensure you receive the most accurate and reliable resources for your certification journey.
Command PPP CHAP Password Use This command is used to send a password to a remote CHAP server for authentication. Syntax Router(config-if)#ppp chap password <password> Example In this example, R1’s S1/1 interface is configured to authenticate R3 using CHAP. CopyR1(config)#int s1/1 R1(config-if)#encapsulation ppp R1(config-if)#ppp authentication chap R1(config-if)# *Mar …
Command Encapsulation PPP Use This command enables PPP encapsulation and functionality on a serial interface. Syntax Router(config-if)#encapsulation ppp Example In this example, we will configure R1 and R3’s S1/1 interface as per the diagram using PPP. CopyR1(config-if)#int s1/1 R1(config-if)#encapsulation ppp R1(config-if)#clock rate 64000 R1(config-if)#ip add 192.168.13.1 255.255.255.252 …
Command Mac-Address Use This command is used to logically change the mac address of an interface. Syntax Router(config-if)#mac-address AAAA.AAAA.AAAA Example In this example, we will change 2611XM’s Fa0/0 to have a mac address of AAAA.AAAA.AAAA. Copy2611XM(config)#int fa0/0 2611XM(config-if)#mac-address AAAA.AAAA.AAAA 2611XM(config-if)#do show interface fa0/0 FastEthernet0/0 is up, line protocol …
Command IP RIP Send Use This command is used tell RIP what version to sends its updates in for a specified interface. Can be sent in Version 1, Version 2, or both. Useful if you have a legacy host that runs RIP but only supports Version 1. Syntax …
Command IP OSPF Hello Interval Use Sets the hello interval on an interface. Syntax Router(config-if)#ip ospf hello-interval <seconds> Example In this example, the hello interval is modified for int fa0/0 on R1. Here’s the ospf information for fa0/0 before the change. Notice the hello interval set to the …
Command IP OSPF Network Nonbroadcast Use This command manually sets the OSPF network type to nonbroadcast. This is a default for frame-relay and ATM links. Neighbor statements are required to form adjacency. The Nonbroadcast network type has a DR election. Syntax Router(config-if)#ip ospf network nonbroadcast Example In this …
Command IP OSPF Cost Use This command is used to manually set the OSPF link cost. This is typically done for traffic engineering purposes to modify what link OSPF will prefer. Lower is better. Syntax Router(config-if)#ip ospf cost <cost> Example In this example, we will use cost to …
Command IP Helper-Address Use This command is used to enable the router to forward BOOTP broadcast (and other)packets to a specific host. Syntax Router(config-if)#ip helper-address <ip address> Example In this example, we will configure R1 to provide DHCP services. After that we will configure R3’s Fa0/0 interface to …
Command IP access-group Use This command is used to apply an access-list to an interface. Syntax Router(config-if)#ip access-group <list> <in or out> Option <auto> automatically determine the duplex mode by checking with the neighbor <in> applies the access-list to inbound traffic on the interface. <out> applies the access-list …
Command shutdown Use This command will administratively disable an interface. Alternatively, you can enable the interface by negating the command using no shutdown. Syntax Router(config-if)#shutdown OR Router(config-if)#no shutdown Example In the below example, we shutdown R1’s Fa0/0 interface and then enable the interface again. CopyR1(config)#int fa0/0 R1(config-if)#shutdown R1(config-if)# …
