IT Exam Items Repository

Refer to the exhibit. A small business uses VLANs 2, 3, 4, and 5 between two switches that have a trunk link between them. What native VLAN should be used on the trunk if Cisco best practices are being implemented?
ITExamAnswers Editorial Team asked 6 years ago • 
What caused the following error message to appear?01:11:12: %PM-4-ERR_DISABLE: psecure-violation error detected on Fa0/8, putting Fa0/8 in err-disable state01:11:12: %PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 0011.a0d4.12a0 on port FastEthernet0/8.01:11:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/8, changed state to down01:11:14: %LINK-3-UPDOWN: Interface FastEthernet0/8, changed state to down
ITExamAnswers Editorial Team asked 6 years ago • 
Refer to the exhibit. All hosts and router interfaces are configured correctly. Pings to the server from both H1 and H2 and pings between H1 and H2 are not successful. What is causing this problem?
ITExamAnswers Editorial Team asked 6 years ago • 
Refer to the exhibit. Router R1 has an OSPF neighbor relationship with the ISP router over the 192.168.0.32 network. The 192.168.0.36 network link should serve as a backup when the OSPF link goes down. The floating static route command ip route 0.0.0.0 0.0.0.0 S0/0/1 100 was issued on R1 and now traffic is using the backup link even when the OSPF link is up and functioning. Which change should be made to the static route command so that traffic will only use the OSPF link when it is up?
ITExam Editorial Team asked 6 years ago • ,
Refer to the exhibit. R1 was configured with the static route command ip route 209.165.200.224 255.255.255.224 S0/0/0 and consequently users on network 172.16.0.0/16 are unable to reach resources on the Internet. How should this static route be changed to allow user traffic from the LAN to reach the Internet?
ITExamAnswers Editorial Team asked 6 years ago • ,
Which command will create a static route on R2 in order to reach PC B?
ITExamAnswers Editorial Team asked 5 years ago • ,
On which two routers would a default static route be configured? (Choose two.)
ITExamAnswers Editorial Team asked 7 years ago • 
Refer to the exhibit. Assuming that the routing tables are up to date and no ARP messages are needed, after a packet leaves H1, how many times is the L2 header rewritten in the path to H3?
ITExamAnswers Editorial Team asked 6 years ago • 
Order the DHCP process steps. (Not all options are used.)
ITExamAnswers Editorial Team asked 6 years ago • 
Refer to the exhibit. Based on the exhibited configuration and output, what are two reasons VLAN 99 missing? (Choose two.)
ITExamAnswers Editorial Team asked 6 years ago • 
Refer to the exhibit. A network engineer is preparing to upgrade the IOS system image on a Cisco 2901 router. Based on the output shown, how much space is available for the new image?
ITExamAnswers Editorial Team asked 6 years ago • 
What is indicated by the M in the Cisco IOS image name c1900-universalk9-mz.SPA.153-3.M.bin?
ITExamAnswers Editorial Team asked 6 years ago • 
A network administrator is verifying a configuration that involves network monitoring. What is the purpose of the global configuration command logging trap 4?
ITExamAnswers Editorial Team asked 6 years ago • 
Refer to the exhibit. A PC at address 10.1.1.45 is unable to access the Internet. What is the most likely cause of the problem?
ITExamAnswers Editorial Team asked 6 years ago • 
A network administrator is configuring an ACL with the command access-list 10 permit 172.16.32.0 0.0.15.255. Which IPv4 address matches the ACE?
ITExamAnswers Editorial Team asked 6 years ago • 
« Previous1…132133134135136…1,378Next »
Ask Question