Category: CCNA Labs Simulation
DUMPS, Cisco Certified Network Associate, Routing and Switching CCNA 200-125 Lab Manual Simulation Exam Answers Questions 2017: NAT, ACL-1-2-3-4-5 EIGRP CLI
Question Answer and Explanation For this question we only need to use the show running-config command to answer all the questions below Router>enable Router#show running-config Question 1: How can we fix the problem but only allow ping to work while disabling telnet? A – Correctly assign an IP address to …
You work as a network engineer for SASCOM Network Ltd company. On router HQ, a provider link has been enabled and you must configure an IPv6 default route on HQ and make sure that this route is advertised in IPv6 OSPF process. Also, you must troubleshoot another issue. …
Question Refer to the topology. Your company has decided to connect the main office with three other remote branch offices using point-to-point serial links. You are required to troubleshoot and resolve OSPF neighbor adjacency issues between the main office and the routers located in the remote branch offices. …
Lab Simulation Question – ACL-2 Question: A network associate is adding security to the configuration of the Corp1 router. The user on host C should be able to use a web browser to access financial information from the Finance Web Server. No other hosts from the LAN nor …
Refer to the topology. Your company has connected the routers R1, R2 and R3 with serial links. R2 and R3 are connected to the switches SW1 and SW2, respectively. SW1 and SW2 are also connected to the routers R4 and R5. The EIGRP routing protocol is configured. You …
Download RIPv2 Troubleshooting Sim Packet Tracer file .PKA 1. Refer to the topology below and answer the questions using “show” commands. Server1 and Server2 are unable to communicate with the rest of the network. Your initial check with system administrators shows that IP address settings are correctly configured …
You can download this lab and practice with Packet Tracer: 1. Refer to the topology below and answer the questions. Examine the DHCP configuration between R2 and R3, R2 is configured as the DHCP server and R3 as the client. What is the reason R3 is not receiving …
Lab Simulation Question – ACL-5 A corporation wants to add security to its network. The requirements are: – Host C should be able to use a web browser (HTTP) to access the Finance Web Server. – Other types of access from host C to the Finance Web Server …
A network associate is configuring a router for the Weaver company to provide internet access. The ISP has provided the company six public IP addresses of 198.18.184.105 – 198.18.184.110. The company has 14 hosts that need to access the internet simultaneously. The hosts in the company LAN have …
A network associate is configuring a router for the Weaver company to provide internet access. The ISP has provided the company six public IP addresses of 198.18.184.105 – 198.18.184.110. The company has 14 hosts that need to access the internet simultaneously. The hosts in the company LAN have …
