Category: ITE v7 Labs
5.4.2.8 Lab - Build and Test a Network Cable Instructor Note: Red font color or gray highlights indicate text that appears in the Instructor copy only. Introduction In this lab, you will build and test a straight-through Unshielded Twisted-Pair (UTP) Ethernet network cable. Note: With a straight-through cable, …
4.2.3.6 Lab – Troubleshoot Hardware Problems Instructor Note: Red font color or gray highlights indicate text that appears in the Instructor copy only. Introduction In this lab, you will diagnose the cause of various hardware problems and solve them. Recommended Equipment A computer with an operating system installed. …
4.2.3.5 Lab – Use a Multimeter and a Power Supply Tester Instructor Note: Red font color or gray highlights indicate text that appears in the Instructor copy only. Introduction In this lab, you will learn how to use and handle a multimeter and a power supply tester. Recommended …
3.4.1.7 Lab - Research a Hardware Upgrade Instructor Note: Red font color or gray highlights indicate text that appears in the Instructor copy only. Introduction Use the Internet, a newspaper, or a local store to gather information about hardware components. Your customer’s computer currently has one module of …
3.2.1.3 Lab – Ohms Law Instructor Note: Red font color or gray highlights indicate text that appears in the Instructor copy only. Answer the following questions based on electricity and Ohm’s Law. Show all steps when solving problems. Instructor Note: Many of the formulas in this activity are …
3.1.2.7 Lab - Install Third-Party Software in Windows Instructor Note: Red font color or gray highlights indicate text that appears in the Instructor copy only. Introduction In this lab, you will install and remove a third-party software application supplied by your instructor. You will install the Packet Tracer …
3.1.2.6 Lab - Install Windows Instructor Note: Red font color or gray highlights indicate text that appears in the Instructor copy only. Objectives In this lab, you will install Windows 10. Background / Scenario In order to complete many of the remaining labs in this course, you will …
3.1.2.5 Lab - Search for BIOS or UEFI Firmware Updates Instructor Note: Red font color or gray highlights indicate text that appears in the Instructor copy only. Introduction In this lab, you will identify the current BIOS or UEFI version, and then search for BIOS or UEFI update …
3.1.1.6 Lab - Investigate BIOS or UEFI Settings Instructor Note: Red font color or gray highlights indicate text that appears in the Instructor copy only. Introduction In this lab, you will boot the computer, explore the firmware setup utility program, and change the boot order sequence. Instructor Note: …
2.1.7.11 Lab – Complete the Computer Assembly Instructor Note: Red font color or gray highlights indicate text that appears in the Instructor copy only. Introduction In this lab, you will install the side panels and the external cables on the computer. Recommended Equipment Computer with power supply, motherboard, …
