Your colleague has built a Layer 2 network in your client locations. You must verify the configuration and fix any issues identified as per customer requirements. Customer requirements: + Verify if switch ports are assigned correct VLANs as shown in topology. Identify and fix any misconfiguration found in …

Refer to the topology below. Your company asks you to identify the issues in Phase 1 EIGRP implementation. You have console access on R1, R2, R3 Branch1 and Branch2 routers. Only use show commands to troubleshoot the issues. You are implementing EIGRP between the main office and branch …

Question All routers are running IPv6 OSPF with process ID 100. The loopback0 IPv4 address is the OSPF router ID of each router. On HQ router, a provider link is provided and you have to configure an IPv6 default route on HQ and make sure this route is …

Refer to the topology below and answer the following questions. Note: There may be different faults in this sim so please notice the following faults: 1. ACL blocking traffic on interface between R2 and R3 2. The network was not advertised in EIGRP 3. Two routers couldn’t establish …