Return (at –More– prompt) Command on CISCO Router/Switch

Command

Return (at –More– prompt)

Use

Displays one more line of output at the ‘–More–‘ prompt.

Syntax

Hit ‘Return’ key at ‘–More–‘ prompt.

Example

First, the show run command is executed, which has a very large output.

R2#show run
Building configuration…Current configuration : 1249 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R2
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$2QMF$DtTeVb/DWIpqYDvyHA6gV/
!
no aaa new-model
memory-size iomem 5
!
!
ip cef
no ip domain lookup
!
!
–More–

Next, the enter key is hit at the ‘–More–‘ prompt to display another page of output from the initial show run command.

R2#show run
Building configuration…Current configuration : 1249 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R2
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$2QMF$DtTeVb/DWIpqYDvyHA6gV/
!
no aaa new-model
memory-size iomem 5
!
!
ip cef
no ip domain lookup
!
!
!

Continue hitting enter until all lines of output for the command are displayed.

key chain CRACK_ENCRYPTION
key 1R2#

Related Articles

Leave a Reply

avatar