Exec-Timeout Command on CISCO Router/Switch

Command

Exec-Timeout

Use

Sets the timeout period for console session inactivity.

Syntax

Router(config-line)#exec-timeout <minutes> <seconds>

<minutes> 0-35791
<seconds> 0-2147483

Example

In this example an exec-timeout is set for console 0.

R2#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#line con 0
R2(config-line)#exec-timeout 15 50
R2(config-line)#

Related Articles

Leave a Reply

avatar