Show Frame-Relay PVC Command on CISCO Router/Switch

Command

Show Frame-Relay PVC

Use

This command displays any PVC information the router has learned about.

Syntax

Router#show frame-relay pvc <dlci>

Example

In this example, we use show frame-relay mapping to verify that R4 has learned about the other links via inverse-arp. We also verify that we can ping.

R4(config)#do show frame pvc

PVC Statistics for interface Serial0/0 (Frame Relay DTE)

Active Inactive Deleted Static
Local 2 0 0 0
Switched 0 0 0 0
Unused 0 0 0 0

DLCI = 401, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/0

input pkts 236 output pkts 20 in bytes 39204
out bytes 1730 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 5 out bcast bytes 170
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 01:39:06, last time pvc status changed 01:38:05

DLCI = 403, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/0

input pkts 13 output pkts 10 in bytes 792
out bytes 690 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 5 out bcast bytes 170
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 01:39:07, last time pvc status changed 01:38:07

Related Articles

Leave a Reply

avatar