Show IP Access-Lists Command on CISCO Router/Switch

Command

Show IP Access-Lists

Use

This command displays information about the access-lists that are configured on a router. It also shows information about what lines are matching in the ACL.

Syntax

Router#show ip access-lists
OR
Router#show ip access-lists <number or name>

Example

In the below example we use show access-lists to see what access-lists are configured on R1..

R1(config)#do show ip access-list
Extended IP access list 102
10 deny tcp any any gt 1024
20 permit ip any any (4062 matches)

Related Articles

Leave a Reply

avatar