Category: CCNA Security 2.0 Labs
Packet Tracer - Configuring IPv6 ACLs Topology Addressing Table Objectives Part 1: Configure, Apply, and Verify an IPv6 ACL Part 2: Configure, Apply, and Verify a Second IPv6 ACL Part 1: Configure, Apply, and Verify an IPv6 ACL Logs indicate that a computer on the 2001:DB8:1:11::0/64 network …
Packet Tracer - Configure IP ACLs to Mitigate Attacks Topology Addressing Table Objectives • Verify connectivity among devices before firewall configuration. • Use ACLs to ensure remote access to the routers is available only from management station PC-C. • Configure ACLs on R1 and R3 to mitigate …
Packet Tracer - Configuring Extended ACLs - Scenario 2 Topology Addressing Table Objectives Part 1: Configure, Apply and Verify an Extended Numbered ACL Part 2: Reflection Questions Background / Scenario In this scenario, devices on one LAN are allowed to remotely access devices in another LAN using …
Packet Tracer - Configuring Extended ACLs - Scenario 1 Topology Addressing Table Objectives Part 1: Configure, Apply and Verify an Extended Numbered ACL Part 2: Configure, Apply and Verify an Extended Named ACL Background / Scenario Two employees need access to services provided by the server. PC1 …
Packet Tracer - Configure AAA Authentication on Cisco Routers Topology Addressing Table Device Interface IP Address Subnet Mask Default Gateway Switch Port R1 G0/1 192.168.1.1 255.255.255.0 N/A S1 F0/1 S0/0/0 (DCE) 10.1.1.2 255.255.255.252 N/A N/A R2 G0/0 192.168.2.1 255.255.255.0 N/A S2 F0/2 S0/0/0 10.1.1.1 255.255.255.252 N/A N/A S0/0/1 …
Packet Tracer - Configure Cisco Routers for Syslog, NTP, and SSH Operations Topology Addressing Table Objectives • Configure OSPF MD5 authentication. • Configure NTP. • Configure routers to log messages to the syslog server. • Configure R3 to support SSH connections. Background / Scenario In this activity, …
