1. Which characteristic describes both ABRs and ASBRs that are implemented in a multiarea OSPF network? They usually have many local networks attached. They both run multiple routing protocols simultaneously. They are required to perform any summarization or redistribution tasks. They are required to reload frequently and quickly …
1. Refer to the exhibit. Which conclusion can be drawn from this OSPF multiaccess network? When a DR is elected all other non-DR routers become DROTHER. All DROTHER routers will send LSAs to the DR and BDR to multicast 224.0.0.5. If the DR stops producing Hello packets, a …
1. Refer to the exhibit. An administrator attempts to configure EIGRP for IPv6 on a router and receives the error message that is shown. Which command must be issued by the administrator before EIGRP for IPv6 can be configured? no shutdown eigrp router-id 100.100.100.100 ipv6 unicast-routing ipv6 eigrp …
1. Refer to the exhibit. Which two conclusions can be derived from the output? (Choose two.) There is one feasible successor to network 192.168.1.8/30. The network 192.168.10.8/30 can be reached through 192.168.11.1. The reported distance to network 192.168.1.0/24 is 41024256. The neighbor 172.16.6.1 meets the feasibility condition to …
1. What is the default maximum amount of bandwidth that can be used for exchanging EIGRP messages on an EIGRP-configured interface? 50% 10% 100% 75% 2. If replies are not received from all outstanding queries, how long will an EIGRP router wait before placing a route into the …
1. Which two protocols are allowed to be routed by EIGRP as a consequence of the PDM feature? (Choose two.) IPv4 TCP IPv6 UDP RTP 2. Which bandwidth value is used when calculating the EIGRP metric of a route? the fastest bandwidth of all interfaces on the router …
1. What do devices on the same IPv4 subnet have in common? They all use the same default gateway. They all have a subnet mask of /8, /16, or /24. They all have the same last octet in their IPv4 addresses. They all have the same number in …
23.2.2 Packet Tracer – Explore a NetFlow Implementation (Answers) Topology Objectives Part 1: Observe NetFlow Flow Records – One Direction Part 2: Observe NetFlow Records for a Session that Enters and Leaves the Collector Background In this activity, you will use Packet Tracer to create network traffic and …
23.2.1 Packet Tracer – Logging Network Activity (Answers) Topology Addressing Table Device Private IP Address Public IP Address FTP_Server 192.168.30.253 209.165.200.227 SYSLOG_SERVER 192.168.11.254 209.165.200.229 Router2 N/A 209.165.200.226 Objectives Part 1: Create FTP traffic Part 2: Investigate the FTP Traffic Part 3: View Syslog Messages Background / Scenario In …
22.2.1 Packet Tracer – Configure AAA Authentication on Cisco Routers (Answers) Topology Addressing Table Device Interface IP Address Subnet Mask Default Gateway Switch Port R1 G0/1 192.168.1.1 255.255.255.0 N/A S1 F0/1 S0/0/0 (DCE) 10.1.1.2 255.255.255.252 N/A R2 G0/0 192.168.2.1 255.255.255.0 N/A S2 F0/2 S0/0/0 10.1.1.1 255.255.255.252 N/A S0/0/1 …
