5.1.2 Lab – Implement VTP (Answers) Topology Objectives Part 1: Build the Network, Configure Basic Device Settings and Interface Addressing Part 2: Implement and Observe a VTPv2 Domain Part 3: Implement and Observe a VTPv3 Domain Background / Scenario VLAN Trunking Protocol (VTP) is a technology that manages …
4.1.2 Lab – Implement MST (Answers) Topology Objectives Part 1: Build the Network and Configure Basic Device Settings and Interface Addressing Part 2: Implement and Observe MST Part 3: Configure, Tune and Verify Basic MST Operation Background / Scenario Cisco’s Per VLAN Spanning Tree (PVST+) provides a significant …
3.1.2 Lab – Implement Advanced STP Modifications and Mechanisms (Answers) Topology Addressing Table Device Interface IP Address D1 VLAN 1 10.0.0.1/8 D2 VLAN 1 10.0.0.2/8 A1 VLAN 1 10.0.0.3/8 Objectives Part 1: Build the Network and Configure Basic Device Settings and Interface Addressing Part 2: Implement and Observe …
2.1.2 Lab – Observe STP Topology Changes and Implement RSTP (Answers) Topology Addressing Table Device Interface IPv4 Address D1 VLAN1 10.0.0.1/8 D2 VLAN1 10.0.0.2/8 A1 VLAN1 10.0.0.3/8 Objectives Part 1: Build the Network and Configure Basic Device Settings Part 2: Observe STP Convergence and Topology Change Part 3: …
1.1.2 Lab – Implement Inter-VLAN Routing (Answers) Topology Addressing Table Device Interface IPv4 Address IPv6 Address IPv6 Link-Local R1 G0/0/1 10.1.13.1/24 2001:db8:acad:10d1::1/64 fe80::1:1 R1 S0/1/1 10.1.3.1/24 2001:db8:acad:1013::1/64 fe80::1:2 D1 G1/0/11 10.1.13.13/24 2001:db8:acad:10d1::d1/64 fe80::d1:1 D1 VLAN50 10.2.50.1/24 2001:db8:acad:1050::d1/64 fe80::d1:2 D1 VLAN60 10.2.60.1/24 2001:db8:acad:1060::d1/64 fe80::d1:3 R3 S0/1/1 10.1.3.3/24 2001:db8:acad:1013::3/64 fe80::3:1 …
12.2.5.8 Packet Tracer – Configure Wireless Security (Answers) Topology Objectives Configure WPA2 on a wireless router. Configure MAC Filtering on a wireless router. Configure Single Port Forwarding on a wireless router. Introduction In this activity, you will configure a wireless router to: Use WPA2 Personal as security method …
8.1.2.15 Packet Tracer – Test a Wireless Connection (Answers) Topology Objectives Configure a computer to join a wireless network. Test the wireless connection. Introduction In this activity, you will configure PC3 to connect to the network via a wireless router. You will also use various tools to test …
8.1.2.13 Packet Tracer – Connect Wireless Computers to a Wireless Router (Answers) Topology Objectives Configure basic wireless settings on a computer. Configure basic security on a wireless router. Verify full connectivity. Introduction In this activity, you will configure wireless computers to connect to a network via a wireless …
8.1.2.11 Packet Tracer – Connect to a Wireless Router and Configure Basic Settings (Answers) Topology Objectives Configure a PC to join a wireless network. Test the wireless connection. Introduction In this activity, you will configure a wireless router to accept CompanyLaptop as a wireless client and route its …
7.4.1.12 Packet Tracer – Add Computers to an Existing Network (Answers) Topology Objectives Configure the computers to use DHCP. Configure Static addressing. Use ipconfig to retrieve host IP information. Use ping to verify connectivity. Hint: To ensure that the instructions always remain visible during an activity, click the …
