6.4.4 Module Quiz - Etherchannel Answers 1. An EtherChannel link using LACP was formed between two switches, S1 and S2. While verifying the configuration, which mode combination could be utilized on both switches? S1-passive and S2-passive S1-on and S2-active S1-on and S2-passive S1-passive and S2-active 2. When a …
5.4.2 Module Quiz - STP Answers 1. Which port state will switch ports immediately transition to when configured for PortFast? forwarding blocking listening learning 2. After the election of the root bridge has been completed, how will switches find the best paths to the root bridge? Each switch …
4.5.4 Module Quiz - Inter-VLAN Routing Answers 1. A PC is to access a web server on another network. Which inter-VLAN method will provide the highest bandwidth at Layer 3 and also provide a default gateway for the PC? multilayer switch with routing enabled router on a stick …
3.6.4 Module Quiz - VLANs Answers 1. What happens to a port that is associated with VLAN 10 when the administrator deletes VLAN 10 from the switch? The port creates the VLAN again. The port goes back to the default VLAN. The port automatically associates itself with the …
2.3.2 Module Quiz - Switching Concepts Answers 1. Which statement is true about broadcast and collision domains? The size of the collision domain can be reduced by adding hubs to a network. Adding a switch to a network will increase the size of the broadcast domain. Adding a …
1.6.4 Module Quiz - Basic Device Configuration Answers 1. Which tasks can be accomplished by using the command history feature? (Choose two.) Set the command history buffer size. Recall previously entered commands. View a list of commands entered in a previous session. Recall up to 15 command lines …
System Test Course ( Version 1.1) - System Test Exam Answers 1. What two characteristics describe an FTP connection? (Choose two.) The server establishes the first connection with the client to control traffic that consists of server commands and client replies. A large file requires more than two …
8.8.3 Packet Tracer - Implement REST APIs with an SDN Controller (Answers) Addressing Table Note: All subnet masks are /24 (255.255.255.0). Device Interface IP Address R1 G0/0/0 192.168.101.1/24 S0/1/0 192.168.1.2 R2 G0/0/0 192.168.102.1 S0/1/1 192.168.2.2 R3 G0/0/0 10.0.1.1 G0/0/1 10.0.2.1 S0/1/0 192.168.1.1 S0/1/1 192.168.2.1 SWL1 VLAN 1 192.168.101.2 …
8.8.2 Packet Tracer - Compare CLI and SDN Controller Network Management (Answers) Addressing Table Note: All subnet masks are /24 (255.255.255.0). Device Interface IP Address R1 G0/0/0 192.168.101.1 S0/1/0 192.168.1.2 R2 G0/0/0 192.168.102.1 S0/1/1 192.168.2.2 R3 G0/0/0 10.0.1.1 G0/0/1 10.0.2.1 S0/1/0 192.168.1.1 S0/1/1 192.168.2.1 SWL1 VLAN 1 192.168.101.2 …
5.6.6 Packet Tracer - Troubleshoot Common Network Problems (Answers) Addressing Table Device Interface IPv4 Address Subnet Mask Default Gateway R1 G0/0/0 209.165.200.225 255.255.255.248 N/A G0/0/1 10.1.1.2 255.255.255.252 R3 G0/0/0 10.2.2.2 255.255.255.252 N/A G0/0/1 172.16.3.1 255.255.255.0 FIREWALL VLAN1 192.168.1.1 255.255.255.0 N/A VLAN2 209.165.200.226 255.255.255.248 VLAN3 192.168.2.1 255.255.255.0 DEVASC Server …
