7.5.1 Lab – Basic Wireless Configuration Answers Topology Diagram Learning Objectives Configure options in the Linksys Setup tab. Configure options in the Linksys Wireless tab. Configure options in the Linksys Administration tab. Configure options in the Linksys Security tab. Add wireless connectivity to a PC. Test connectivity. Introduction …

5.5.1 Lab – Basic Spanning Tree Protocol Answers Topology Diagram Addressing Table Device (Hostname) Interface IP Address Subnet Mask Default Gateway S1 VLAN 1 172.17.10.1 255.255.255.0 N/A S2 VLAN 1 172.17.10.2 255.255.255.0 N/A S3 VLAN 1 172.17.10.3 255.255.255.0 N/A PC1 NIC 172.17.10.21 255.255.255.0 172.17.10.254 PC2 NIC 172.17.10.22 255.255.255.0 …

2.5.3 Lab -Managing Switch Operating System and Configuration Files Challenge Answers Topology Diagram Addressing Table Device Hostname Interface IP Address Subnet Mask Default Gateway PC1 Host-A NIC 172.17.99.21 255.255.255.0 172.17.99.1 S1 ALSwitch VLAN99 172.17.99.11 255.255.255.0 172.17.99.1 Learning Objectives Upon completion of this lab, you will be able to: …

2.5.2 Lab – Managing Switch Operating System and Configuration Files Answers Topology Diagram Addressing Table Device Hostname Interface IP Address Subnet Mask Default Gateway PC1 Host-A NIC 172.17.99.21 255.255.255.0 172.17.99.1 S1 ALSwitch VLAN99 172.17.99.11 255.255.255.0 172.17.99.1 Learning Objectives Upon completion of this lab, you will be able to: …

1. Which two devices are used to connect IoT devices to a home network? (Choose two.) DNS server Cisco 2960 switch Cisco 2911 router registration server home gateway 2. Refer to the exhibit. The above icon is in the lower right hand corner of the Packet Tracer screen. …

In Packet Tracer, to access the command line interface (CLI) of a Switch or Router, you can use one of the following two ways: The CLI tab Console port The CLI tab This is the simplest way to access the Command Line Interface (CLI) of a Switch/Router. Click …