Category: CCNA v6
CCNA 4 v6.0 (Connecting Networks v6) Chapter 8: Network Troubleshooting: Check Your Understanding Questions Answers 1. Which statement describes the physical topology for a LAN? It defines how hosts and network devices connect to the LAN. It depicts the addressing scheme that is employed in the LAN. It …
CCNA 4 v6.0 (Connecting Networks v6) Chapter 7: Network Evolution: Check Your Understanding Questions Answers 1. What is an example of an M2M connection in the IoT? A user sends an email over the Internet to a friend. An automated alarm system in a campus sends fire alarm …
CCNA 4 v6.0 (Connecting Networks v6) Chapter 6: Quality of Service: Check Your Understanding Questions Answers 1. Under which condition does congestion occur on a converged network with voice, video, and data traffic? If a user downloads a file that exceeds the file limitation that is set on …
CCNA 4 v6.0 (Connecting Networks v6) Chapter 5: Network Security and Monitoring: Check Your Understanding Questions Answers 1. Which statement describes SNMP operation? A get request is used by the SNMP agent to query the device for data. A set request is used by the NMS to change …
CCNA 4 v6.0 (Connecting Networks v6) Chapter 4: Access Control Lists: Check Your Understanding Questions Answers 1. Which three statements describe ACL processing of packets? (Choose three.) A packet can either be rejected or forwarded as directed by the ACE that is matched. A packet that does not …
CCNA 4 v6.0 (Connecting Networks v6) Chapter 3: Branch Connections: Check Your Understanding Questions Answers 1. Which technology provides a secure connection between a SOHO and the headquarters office? PPPoE QoS VPN WiMax 2. Which two network components does a teleworker require to connect remotely and securely from …
CCNA 4 v6.0 (Connecting Networks v6) Chapter 2: Point-to-Point Connections: Check Your Understanding Questions Answers 1. Which command can be used to view the cable type that is attached to a serial interface? Router(config)# show interfaces Router(config)# show controllers Router(config)# show ip interface Router(config)# show ip interface brief …
CCNA 4 v6.0 (Connecting Networks v6) Chapter 1: WAN Concepts: Check Your Understanding Questions Answers 1. A small company with 10 employees uses a single LAN to share information between computers. Which type of connection to the Internet would be appropriate for this company? A broadband service, such …
CCNA 3 v6.0 (Scaling Networks v6) Chapter 10: OSPF Tuning and Troubleshooting: Check Your Understanding Questions Answers 1. What information can be gathered from the routing table entry O*E2 0.0.0.0/0 via 192.168.16.3, 00:20:22, Serial0/0/0? The edge of the OSPF area 0 is the interface that is addressed 192.168.16.3. …
CCNA 3 v6.0 (Scaling Networks v6) Chapter 9: Multiarea OSPF: Check Your Understanding Questions Answers 1. Which statement describes a multiarea OSPF network? It consists of multiple network areas that are daisy-chained together. It has a core backbone area, with other areas connected to the backbone area. It …
