IT Exam Items Repository

What is the purpose of classifying Cisco IP routing table entries as ultimate route, level 1 route, level 1 parent route, and level 2 child routes?
ITExamAnswers Editorial Team asked 3 years ago • 
A network administrator has examined the routing table of a router and noted that the entry for the destination network 172.16.4.0/24 begins with the letter D. What does this letter signify?
ITExamAnswers Editorial Team asked 3 years ago • 
What is an advantage of OSPF compared to RIP?
ITExamAnswers Editorial Team asked 3 years ago • 
Which algorithm is used by the OSPF routing process to construct the SPF tree on a router?
ITExamAnswers Editorial Team asked 3 years ago • 
Which classless routing protocol supports VLSM and CIDR, bounded and triggered updates, and uses the multicast address of 224.0.0.10?
ITExamAnswers Editorial Team asked 3 years ago • 
What are two characteristics of link-state protocols compared to distance vector protocols? (Choose two.)
ITExamAnswers Editorial Team asked 6 years ago • ,
Which classless routing protocol supports VLSM and CIDR, supports manual route summarization, and uses the multicast address 224.0.0.9?
ITExamAnswers Editorial Team asked 3 years ago • 
Which factor directly affects the time to convergence?
ITExamAnswers Editorial Team asked 3 years ago • 
Which is avalid summary route for networks 192.168.8.0/22, 192.168.12.0/22, and 192.168.16.0/22?
ITExamAnswers Editorial Team asked 3 years ago • 
What command, or set of commands, would be used to determine if the following configuration on router HQ works as designed?
ITExamAnswers Editorial Team asked 5 years ago • ,
Which two conditions must exist in order to summarize IPv6 routes into a single static IPv6 route? (Choose two.)
ITExamAnswers Editorial Team asked 3 years ago • 
Which subnet mask would be used for a network that has a maximum of 300 devices?
ITExamAnswers Editorial Team asked 3 years ago • 
Why would a summarized static route be configured on a router?
ITExamAnswers Editorial Team asked 3 years ago • 
What type of static route is created when the next-hop IP address and exit interface are specified?
ITExamAnswers Editorial Team asked 6 years ago • , ,
A network administrator enters the following command into Router1: ip route 192.168.0.0 255.255.255.0 S0/1/0. Router1 then receives a packet that is destined for 192.168.0.22/24. After finding the recently configured static route in the routing table, what does Router1 do next to process the packet?
ITExamAnswers Editorial Team asked 4 years ago • ,
« Previous1…346347348349350…1,378Next »
Ask Question