IT Exam Items Repository

A network engineer configures the ip route 10.1.1.0 255.255.255.0 s0/0/0 command on a router and then issues a show ip route command from enable mode. No routes for subnet 10.1.1.0/24 appear in the output. Which of the following could be true?
ITExamAnswers Editorial Team asked 4 years ago • 
Which of the following commands correctly configures a static route?
ITExamAnswers Editorial Team asked 4 years ago • 
An engineer configures a static IPv4 route on Router R1. Which of the following pieces of information should not be listed as a parameter in the configuration command that creates this static IPv4 route?
ITExamAnswers Editorial Team asked 4 years ago • 
After configuring a working router interface with IP address/mask 10.1.1.100/26, which of the following routes would you expect to see in the output of the show ip route command? (Choose two answers.)
ITExamAnswers Editorial Team asked 4 years ago • 
Which of the following is different on the Cisco switch CLI for a Layer 2 switch as compared with the Cisco router CLI?
ITExamAnswers Editorial Team asked 4 years ago • 
Which of the following commands do not list the IP address and mask of at least one interface? (Choose two answers.)
ITExamAnswers Editorial Team asked 4 years ago • 
The output of the show ip interface brief command on R1 lists interface status codes of “down” and “down” for interface GigabitEthernet 0/0. The interface connects to a LAN switch with a UTP straight-through cable. Which of the following could be true?
ITExamAnswers Editorial Team asked 4 years ago • 
Which answers list a task that could be helpful in making a router interface G0/0 ready to route packets? (Choose two answers.)
ITExamAnswers Editorial Team asked 4 years ago • 
Which of the following commands might you see associated with a router CLI, but not with a switch CLI?
ITExamAnswers Editorial Team asked 4 years ago • 
Which of the following installation steps are more likely required on a Cisco router, but not typically required on a Cisco switch? (Choose two answers.)
ITExamAnswers Editorial Team asked 4 years ago • 
A fellow engineer tells you to configure the DHCP server to lease the last 100 usable IP addresses in subnet 10.1.4.0/23. Which of the following IP addresses could be leased as a result of your new configuration?
ITExamAnswers Editorial Team asked 4 years ago • 
Which of the following is the subnet broadcast address for the subnet in which IP address 172.31.77.201/27 resides?
ITExamAnswers Editorial Team asked 4 years ago • 
Which of the following is the resident subnet for IP address 192.168.44.97/30?
ITExamAnswers Editorial Team asked 4 years ago • 
Which of the following is the resident subnet ID for IP address 10.7.99.133/24?
ITExamAnswers Editorial Team asked 4 years ago • 
Which of the following statements are true regarding the binary subnet ID, subnet broadcast address, and host IP address values in any single subnet? (Choose two answers.)
ITExamAnswers Editorial Team asked 4 years ago • 
« Previous1…812813814815816…1,378Next »