7.1.6 Lab – Use Wireshark to Examine Ethernet Frames Topology Objectives Part 1: Examine the Header Fields in an Ethernet II Frame Part 2: Use Wireshark to Capture and Analyze Ethernet Frames Background / Scenario When upper layer protocols communicate with each other, data flows down the Open …
4.6.6 Lab – View Wired and Wireless NIC Information Objectives Part 1: Identify and Work with PC NICs Part 2: Identify and Use the System Tray Network Icons Background / Scenario This lab requires you to determine the availability and status of the network interface cards (NICs) on …
3.7.10 Lab – Use Wireshark to View Network Traffic Topology Objectives Part 1: Capture and Analyze Local ICMP Data in Wireshark Part 2: Capture and Analyze Remote ICMP Data in Wireshark Background / Scenario Wireshark is a software protocol analyzer, or “packet sniffer” application, used for network troubleshooting, …
3.7.9 Lab – Install Wireshark Objectives Download and Install Wireshark Background / Scenario Wireshark is a software protocol analyzer, or “packet sniffer” application, used for network troubleshooting, analysis, software and protocol development, and education. As data streams travel back and forth over the network, the sniffer “captures” each …
3.4.4 Lab – Research Networking Standards Objectives Research Networking Standards Organizations Reflect on Internet and Computer Networking Experiences Background / Scenario Using web search engines like Google, research the non-profit organizations that are responsible for establishing international standards for the internet and the development of internet technologies. Required …
2.9.2 Lab – Basic Switch and End Device Configuration Topology Addressing Table Device Interface IP Address Subnet Mask S1 VLAN 1 192.168.1.1 255.255.255.0 S2 VLAN 1 192.168.1.2 255.255.255.0 PC-A NIC 192.168.1.10 255.255.255.0 PC-B NIC 192.168.1.11 255.255.255.0 Objectives Set Up the Network Topology Configure PC Hosts Configure and Verify …
2.3.8 Lab – Navigate the IOS by Using Tera Term for Console Connectivity Topology Objectives Part 1: Access a Cisco Switch through the Serial Console Port Part 2: Display and Configure Basic Device Settings Part 3: (Optional) Access a Cisco Router Using a Mini-USB Console Cable Note: NetLab …
CCNA Cyber Ops introduces the core security concepts and skills needed to monitor, detect, analyze and respond to cybercrime, cyber espionage, insider threats, advanced persistent threats, regulatory requirements, and other cybersecurity issues facing organizations. It emphasizes the practical application of the skills needed to maintain and ensure security …
CCNA Cybersecurity Operations v1.1 Skills Assessment Introduction Working as the security analyst for ACME Inc., you notice a number of events on the SGUIL dashboard. Your task is to analyze these events, learn more about them, and decide if they indicate malicious activity. You will have access to …
1.6.2 Lab – Configure Basic Router Settings Topology Addressing Table Device Interface IP Address / Prefix Default Gateway R1 G0/0/0 192.168.0.1 /24 N/A 2001:db8:acad::1 /64 fe80::1 G0/0/1 192.168.1.1 /24 2001:db8:acad:1::1 /64 fe80::1 Loopback0 10.0.0.1 /24 2001:db8:acad:2::1 /64 fe80::1 PC-A NIC 192.168.1.10 /24 192.168.1.1 fe80::1 NIC 2001:db8:acad:1::10 /64 PC-B …
