Chapter 7: Network EvolutionChapter 7 - Sections & Objectives 7.1 Internet of Things Explain the value of the Internet of Things. 7.2 Cloud and Virtualization Explain why cloud computing and virtualization are necessary for evolving networks. 7.3 Network Programming Explain why network programmability is necessary for evolving networks. …
Chapter 6 - Sections & Objectives 6.1 QoS Overview Explain the purpose and characteristics of QoS. 6.2 QoS Mechanisms Explain how networking devices implement QoS. 6.1 QoS Overview Network Transmission Quality Prioritizing Traffic Queuing packets causes delay because new packets cannot be transmitted until previous packets have been …
Lab Objective: The objective of this lab exercise is to configure named static routes via next hop IP addresses on interfaces connected to a switch on two routers. This lab also goes through the validation of the configured static routes. Lab Purpose: Static route configuration is a fundamental …
Lab Objective: The objective of this lab exercise is to configure static routes via next hop IP addresses on interfaces connected to a switch on two routers. This lab also goes through the validation of the configured static routes. Lab Purpose: Static route configuration is a fundamental skill. …
Chapter 5 - Sections & Objectives 5.1 LAN Security Explain how to mitigate common LAN security. 5.2 SNMP Configure SNMP to monitor network operations in a small to medium-sized business network. 5.3 Cisco Switch Port Analyzer (SPAN) Troubleshoot a network problem using SPAN. 5.1 LAN Security LAN Security …
Chapter 4 - Sections & Objectives 4.1 Standard ACL Operation and Configuration Configure standard IPv4 ACLs. 4.2 Extended IPv4 ACLs Configure extended IPv4 ACLs. 4.3 IPv6 ACLs Configure IPv6 ACLs. 4.4 Troubleshoot ACLs Troubleshoot ACLs. 4.1 Standard ACL Operation and Configuration Review ACLs and the Wildcard Mask An …
Lab Objective: The objective of this lab exercise is to configure static routes via Ethernet interfaces connected to a switch on two routers. This lab also goes through the validation of the configured static routes. Lab Purpose: Static route configuration is a fundamental skill. There are several methods …
Lab Objective: The objective of this lab exercise is for you to learn and understand how to configure inter-VLAN routing using switched virtual interfaces (SVIs). This is technically in the ICND2 syllabus but inter-VLAN routing is also in the CCENT syllabus, so we’ll cover it now. Lab Purpose: …
Lab Objective: The objective of this lab exercise is to configure a router to provide inter-VLAN communication. By default, hosts in one VLAN cannot communicate with hosts in another VLAN without a router routing between the two VLANs. Lab Purpose: Inter-VLAN routing configuration is a fundamental skill. Most …
