Month: September 2017
Chapter 5 - Sections & Objectives 5.1 LAN Security Explain how to mitigate common LAN security. 5.2 SNMP Configure SNMP to monitor network operations in a small to medium-sized business network. 5.3 Cisco Switch Port Analyzer (SPAN) Troubleshoot a network problem using SPAN. 5.1 LAN Security LAN Security …
Chapter 4 - Sections & Objectives 4.1 Standard ACL Operation and Configuration Configure standard IPv4 ACLs. 4.2 Extended IPv4 ACLs Configure extended IPv4 ACLs. 4.3 IPv6 ACLs Configure IPv6 ACLs. 4.4 Troubleshoot ACLs Troubleshoot ACLs. 4.1 Standard ACL Operation and Configuration Review ACLs and the Wildcard Mask An …
Lab Objective: The objective of this lab exercise is to configure static routes via Ethernet interfaces connected to a switch on two routers. This lab also goes through the validation of the configured static routes. Lab Purpose: Static route configuration is a fundamental skill. There are several methods …
Lab Objective: The objective of this lab exercise is for you to learn and understand how to configure inter-VLAN routing using switched virtual interfaces (SVIs). This is technically in the ICND2 syllabus but inter-VLAN routing is also in the CCENT syllabus, so we’ll cover it now. Lab Purpose: …
Lab Objective: The objective of this lab exercise is to configure a router to provide inter-VLAN communication. By default, hosts in one VLAN cannot communicate with hosts in another VLAN without a router routing between the two VLANs. Lab Purpose: Inter-VLAN routing configuration is a fundamental skill. Most …
Lab Objective: The objective of this lab exercise is for you to learn and understand how the errdisable recovery feature works on a Layer 2 network. This lab will not work on Packet Tracer. Lab Purpose: Understanding how errdisable functionality works on a Layer 2 switch is a …
Chapter 3- Sections & Objectives 3.1 Remote Access Connections Select broadband remote access technologies to support business requirements. 3.2 PPPoE Configure a Cisco router with PPPoE. 3.3 VPNs Explain how VPNs secure site-to-site and remote access connectivity. 3.4 GRE Implement a GRE tunnel. 3.5 eBGP Implement eBGP in …
Chapter 2 - Sections & Objectives 2.1 Serial Point-to-Point Overview Configure HDLC encapsulation. 2.2 PPP Operation Explain how PPP operates across a point-to-point serial link. 2.3 PPP Implementation Configure PPP encapsulation. 2.4 Troubleshoot WAN Connectivity Troubleshoot PPP. 2.1 Serial Point-to-Point Overview Serial Communications Point-to-point connections are used to …
Chapter 1 - Sections & Objectives 1.1 WAN Technologies Overview Explain WAN access technologies available to small to medium-sized business networks. 1.2 Selecting a WAN Technology Select WAN access technologies to satisfy business requirements. 1.1 WAN Technologies Overview Purpose of WANs WANs connect LANs WANs are used to …
