IT Exam Items Repository Refer to the exhibit. You have been asked to investigate why users in the District 2 offices are experiencing long delays when accessing their e-mail. After a preliminary investigation, you determine that the route to the District 1 server farm in the District 2 router is through the regional office switch. What can be done to resolve this fault?ITExamAnswers Editorial Team asked 3 years ago • CCNP ROUTE v6.0Refer to the exhibit. A network engineer was called to investigate some intermittent delay and jitter issues with the corporate network that is exhibited. The engineer determined that the root cause of the issue is excessive routing updates. What solution would mitigate this issue?ITExamAnswers Editorial Team asked 3 years ago • CCNP ROUTE v6.0Which criterion must be met before a route can be redistributed into another routing protocol?ITExamAnswers Editorial Team asked 3 years ago • CCNP ROUTE v6.0A router has learned the route 192.168.254.0/24 from multiple sources. These sources are as follows: What route will be injected into the routing table?ITExamAnswers Editorial Team asked 4 years ago • CCNP ROUTE, CCNP ROUTE v6.0Which command would deploy a prefix list in a BGP environment?ITExamAnswers Editorial Team asked 3 years ago • CCNP ROUTE v6.0Which is the default seed metric for an OSPF route that is redistributed into an EIGRP autonomous system?ITExamAnswers Editorial Team asked 3 years ago • CCNP ROUTE v6.0Refer to the exhibit. The network that is shown is operating normally with the routing protocols configured with the default settings. What path will packets from PC1 take to the file server?ITExamAnswers Editorial Team asked 3 years ago • CCNP ROUTE v6.0Which command would allow advertising only an aggregate address of 192.168.0.0/16 when applied by using a neighbor statement that contains prefix-list [prefix-list name] out?ITExamAnswers Editorial Team asked 3 years ago • CCNP ROUTE v6.0Refer to the exhibit. Which command was issued to display the route metric and minimum MTU information that is shown?ITExamAnswers Editorial Team asked 3 years ago • CCNP ROUTE v6.0Refer to the exhibit. A network engineer was called to investigate some intermittent delay and jitter issues with the corporate network that is shown. The engineer determined that the root cause is that the routing tables in the district routers are so large that the routers cannot maintain the tables efficiently. What can be done to mitigate this issue?ITExamAnswers Editorial Team asked 3 years ago • CCNP ROUTE v6.0Which method of redistribution is least likely to introduce a routing loop into a network?ITExamAnswers Editorial Team asked 3 years ago • CCNP ROUTE v6.0Which prefix-list entry will be used when multiple entries in a prefix list match a given prefix?ITExamAnswers Editorial Team asked 5 years ago • CCNP, CCNP ROUTE v6.0What is the final step when configuring policy-based routing?ITExamAnswers Editorial Team asked 5 years ago • CCNP, CCNP ROUTE v6.0Refer to the exhibit. RTA has two paths to network 10.0.0.0/8 via two serial links, Serial 0/0/0 to RTB and Serial 0/0/1 to RTC. RTA is not running any dynamic routing protocol and its preferred route to network 10.0.0.0/8 is via RTC. Which commands on RTA would configure it to use RTB to reach network 10.0.0.0/8 only if the serial link to RTC fails?ITExamAnswers Editorial Team asked 3 years ago • CCNP ROUTE v6.0Refer to the exhibit. Two-way redistribution was configured between OSPF and RIP on R2. After the redistribution, R3 does not see any external routes coming from the RIP domain. The debug ip ospf database external output reveals that no external LSAs are generated for the routes. What could the problem be?ITExamAnswers Editorial Team asked 3 years ago • CCNP ROUTE v6.0