6.5.7 Packet Tracer – Assigning Addresses Answers
Topology
Addressing Table:
This Lab does not include an Addressing Table.
Learning Objectives:
- Assign IP information to a host
- Select the proper IP address, mask and gateway
- Assign the selected information to the host
Introduction:
Given a pool of addresses and masks, assign a host with an address, a subnet mask, and a gateway to allow it to communicate in the network shown.
Task 1: Assign IP information to a host
Step 1. Select the proper IP address, mask and gateway.
Study the network diagram and select from the table below an IP address, subnet mask and default gateway for PC0 that will enable it to communicate with the other devices in the network.
| 10.0.1.253 |
| 10.0.1.254 |
| 10.0.1.132 |
| 10.0.0.109 |
| 10.1.0.1 |
| 210.224.2.151 |
| 255.255.255.0 |
| 10.0.0.109 |
| 255.0.0.0 |
| 255.255.0.0 |
| 255.255.255.0 |
Step 2. Assign the selected information to the host.
Click on PC0. Click the Config tab. In the GLOBAL Settings window assign the Gateway selected in Step 1. Select INTERFACE FastEthernet and assign the IP address and Subnet Mask selected in Step 1. Check your answer by clicking the Check Results button.
