Lab Objective: The objective of this lab exercise is for you to learn and understand how to create and troubleshoot IPv4 addresses on Cisco routers. Lab Purpose: Configuring IPv4 addressing is one of your most fundamental tasks as a Cisco engineer. In the exam, you may also be asked …
CCNA Routing and Switching Introduction to Networks v6.0 1.1 Globally Connected Networking Today Network has no boundary and supports the way we: Learn Communicate Work Play Providing Resources in a Network Networks of Many Sizes Small Home / Office Networks Medium to Large Networks World Wide Network Clients …
Packet Tracer – Skills Integration Challenge Topology Addressing Table Objectives • Configure basic router security • Configure basic switch security • Configure AAA local authentication • Configure SSH • Secure against login attacks • Configure site-to-site IPsec VPNs • Configure firewall and IPS settings • Configure ASA …
Packet Tracer – Configuring ASA Basic Settings and Firewall Using CLI Topology IP Addressing Table Objectives • Verify connectivity and explore the ASA • Configure basic ASA settings and interface security levels using CLI • Configure routing, address translation, and inspection policy using CLI • Configure DHCP, …
Packet Tracer – Configure and Verify a Site-to-Site IPsec VPN Using CLI Topology Addressing Table Objectives • Verify connectivity throughout the network. • Configure R1 to support a site-to-site IPsec VPN with R3. Background / Scenario The network topology shows three routers. Your task is to configure …
Packet Tracer – Layer 2 VLAN Security Topology Objectives • Connect a new redundant link between SW-1 and SW-2. • Enable trunking and configure security on the new trunk link between SW-1 and SW-2. • Create a new management VLAN (VLAN 20) and attach a management PC …
Packet Tracer – Layer 2 Security Topology Objectives • Assign the Central switch as the root bridge. • Secure spanning-tree parameters to prevent STP manipulation attacks. • Enable port security to prevent CAM table overflow attacks. Background / Scenario There have been a number of attacks on …
Packet Tracer – Configure IOS Intrusion Prevention System (IPS) Using the CLI Topology Addressing Table Objectives • Enable IOS IPS. • Configure logging. • Modify an IPS signature. • Verify IPS. Background / Scenario Your task is to enable IPS on R1 to scan traffic entering the …
Packet Tracer – Configuring a Zone-Based Policy Firewall (ZPF) Topology Addressing Table Objectives • Verify connectivity among devices before firewall configuration. • Configure a zone-based policy (ZPF) firewall on R3. • Verify ZPF firewall functionality using ping, SSH, and a web browser. Background/Scenario ZPFs are the latest …