7.2.1.6 Packet Tracer - Configuring Numbered Standard IPv4 ACLs (Instructor Version) Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only. Topology Addressing Table Device Interface IP Address Subnet Mask Default Gateway R1 G0/0 192.168.10.1 255.255.255.0 N/A G0/1 192.168.11.1 255.255.255.0 N/A …
7.1.1.4 Packet Tracer – Access Control List Demonstration (Instructor Version) Instructor Note: Red font color or Gray highlights indicate text that appears in the instructor copy only. Topology Objectives Part 1: Verify Local Connectivity and Test Access Control List Part 2: Remove Access Control List and Repeat Test …
6.3.3.8 Packet Tracer – Inter-VLAN Routing Challenge (Instructor Version – Optional Lab) Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only. Optional activities are designed to enhance understanding and/or to provide additional practice. Topology Addressing Table Device Interface IP Address Subnet Mask …
5.3.1.2 Packet Tracer - Skills Integration Challenge (Instructor Version) Instructor Note: Red font color or Gray highlights indicate text that appears in the instructor copy only. Topology Addressing Table Device Interface IP Address Subnet Mask S1 VLAN 1 10.10.10.2 255.255.255.0 PC1 NIC 10.10.10.10 255.255.255.0 PC2 NIC 10.10.10.11 255.255.255.0 …
Packet Tracer – Configuring RIPv2 (Instructor Version) Instructor Note: Red font color or Gray highlights indicate text that appears in the instructor copy only. Topology Objectives Part 1: Configure RIPv2 Part 2: Verify Configurations Background Although RIP is rarely used in modern networks, it is useful as a …
2.2.5.5 Packet Tracer - Configuring Floating Static Routes Instructor Note: Red font color or Gray highlights indicate text that appears in the instructor copy only. Topology Objectives Part 1: Configure an IPv4 Floating Static Route Part 2: Test Failover to the IPv4 Floating Static Route Part 3: Configure …
This posts consists of a list of important CCNA commands that you may need to use both in CCNA exams and in real world. When you start preparing for CCNA exam, you start developing concepts on various networking topics, but in the real world when you will work …
QUESTION 1. Which technology supports the stateless assignment of IPv6 addresses? A. DNS B. DHCPv6 C. DHCP D. autoconfiguration Correct Answer:BD QUESTION 2. What are two requirements for an HSRP group? (Choose two.) A. exactly one active router B. one or more standby routers C. one or more …
Enabling SSH on Cisco routers and switches Imagine you are a network administrator in a large organization with number of switches and routers. To configure a switch or router on a far off location, there are two choices. One is to go near the switch or router to …
Configuring passwords on Cisco routers and switches In this chapter, we will see how to configure passwords on Cisco routers and switches. Cisco devices have four types of passwords. Console password : Used to set password for the console access. Auxiliary password : It is used to set …
