Category: CCNA 2 Labs – Packet Tracer
10.4.1.1 Packet Tracer – Skills Integration Challenge Topology Addressing Table Device Interface IP Address Subnet Mask Default Gateway HQ G0/0.15 172.16.15.17 255.255.255.240 N/A G0/0.30 172.16.15.33 255.255.255.224 N/A G0/0.45 172.16.15.1 255.255.255.248 N/A G0/0.60 172.16.15.9 255.255.255.248 N/A S0/0/0 172.16.15.245 255.255.255.252 N/A S0/0/1 172.16.15.254 255.255.255.252 N/A S0/1/0 192.135.250.18 255.255.255.252 N/A B1 …
Packet Tracer – Using a TFTP Server to Upgrade a Cisco IOS Image Topology Addressing Table Objectives Part 1: Upgrade an IOS Image on a Cisco Device Part 2: Backup an IOS Image on a TFTP Server Scenario A TFTP server can help manage the storage of IOS …
Packet Tracer – Skills Integration Challenge Topology Addressing Table VLANs and Port Assignments Table Scenario This culminating activity includes many of the skills that you have acquired during this course. First, you will complete the documentation for the network. Make sure you have a printed version of the …
Packet Tracer – Configuring Syslog and NTP Topology Objectives Part 1: Configure Syslog Service Part 2: Generate Logged Events Part 3: Manually Set Switch Clocks Part 4: Configure NTP Service Part 5: Verify Timestamped Logs Scenario In this activity, you will enable and use the Syslog service and …
Packet Tracer – Configure and Verify NTP Topology Addressing Table Objectives In this activity, you will configure NTP on R1 and R2 to allow time synchronization. Background / Scenario Network Time Protocol (NTP) synchronizes the time of day among a set of distributed time servers and clients. While …
Packet Tracer – Verifying and Troubleshooting NAT Configurations Topology Addressing Table Objectives Part 1: Isolate Problems Part 2: Troubleshoot NAT Configuration Part 3: Verify Connectivity Scenario A contractor restored an old configuration to a new router running NAT. But, the network has changed and a new subnet was …
Packet Tracer – Configuring Port Forwarding on a Wireless Router Topology Addressing Table Objectives Part 1: Configure Port Forwarding Part 2: Verify Remote Connectivity to ServerA Scenario Your friend wants to play a game with you on your server. Both of you are at your respective homes, connected …
Packet Tracer – Implementing Static and Dynamic NAT Topology Objectives Part 1: Configure Dynamic NAT with PAT Part 2: Configure Static NAT Part 3: Verify NAT Implementation Part 1: Configure Dynamic NAT with PAT Step 1: Configure traffic that will be permitted for NAT translations. On R2, configure …
Packet Tracer – Configuring Dynamic NAT Objectives Part 1: Configure Dynamic NAT Part 2: Verify NAT Implementation Part 1: Configure Dynamic NAT Step 1: Configure traffic that will be permitted. On R2, configure one statement for ACL 1 to permit any address belonging to 172.16.0.0/16. Step 2: Configure …
Packet Tracer – Configuring Static NAT Objectives Part 1: Test Access without NAT Part 2: Configure Static NAT Part 3: Test Access with NAT Scenario In IPv4 configured networks, clients and servers use private addressing. Before packets with private addressing can cross then Internet, they need to be …
