Month: May 2019
1. After a security incident is verified in a SOC, an incident responder reviews the incident but cannot identify the source of the incident and form an effective mitigation procedure. To whom should the incident ticket be escalated? a SME for further investigation a cyberoperations analyst for help …
Physical Topology Logical Topology Objectives Load the device configuration files for each trouble ticket. Diagnose and resolve Layer 2 connectivity problems. Diagnose and resolve spanning-tree problems. Document the troubleshooting progress, configuration changes, and problem resolution. Background User computers, servers, and printers all connect to the access layer of …
Topology Objectives Assign responsibility for a device or set of devices to team members (optional). Load the baseline configuration for each device in the topology. Use available tools to document key device configuration parameters, such as the interfaces in use, IP addressing, routing protocols, VLANs, logging mechanisms, and …
Topology Objectives Secure EIGRP routing protocol using SHA authentication. Secure OSPF routing protocol using SHA authentication. Background The In this lab, you build a multi-router network and secure the routing protocols used between R1, R2, and R3. Note: This lab uses Cisco 1941 routers with Cisco IOS Release …
Topology Objectives Secure management access. Configure enhanced username password security. Enable AAA RADIUS authentication. Enable secure remote management. Background The management plane of any infrastructure device should be protected as much as possible. Controlling access to routers and enabling reporting on routers are critical to network security and …
Topology Objectives Configure EIGRP on ITA network. Using MP-BGP, configure EBGP for IPv4 and IPv6 between ISP and SanJose1, using IPv4 BGP transport for both protocols. Configure MP-BGP IBGP between SanJose1 and SanJose2. Verify BGP neighbors, BGP tables and routing tables for IPv4 and IPv6. Background SanJose1 in …
