Category: CCNA Exploration 4.0
5.2.2 Packet Tracer – Routers Segment Broadcast Domains Answers Topology Learning Objectives Examine the behavior of pinging the broadcast address on an un-segmented, switched network Examine the behavior of pinging the broadcast address on a segmented, routed network Introduction: Broadcast packets are sent to every host in a …
4.6.1 Packet Tracer – Skills Integration Challenge-Analyzing the Application and Transport Layers Answers Topology Diagram: Partial topology given; must be completed. Device Interface IP Address Subnet Mask Default Gateway R1-ISP Fa0/0 192.168.254.253 255.255.255.0 N/A S0/0/0 10.10.10.6 255.255.255.252 R2-Central Fa0/0 172.16.255.254 255.255.0.0 N/A S0/0/0 10.10.10.5 255.255.255.252 S1-Central VLAN 1 …
4.5.3 Packet Tracer – Application and Transport Layer Protocols Examination Answers Topology Addressing Table This activity does not include an addressing table. Learning Objectives Capture a web request using an URL from a PC Run the simulation and capture the traffic Examine the captured traffic Introduction: Wireshark provides …
4.4.4 Packet Tracer – UDP Operation Answers Topology Learning Objectives Setup and run the simulation Examine the results Introduction: UDP is a connectionless protocol. It is used in place of TCP where speed is important and reliability is not a concern. Domain Name System (DNS) uses UDP as …
4.2.5 Packet Tracer – TCP Session Establishment and Termination Answers Topology Learning Objectives Setup and run the simulation Examine the results Introduction: TCP is a connection-oriented protocol. Before information, such as a web page, can be exchanged, the peers must establish a connection. A connection is established by …
4.1.6 Packet Tracer – UDP and TCP Port Numbers Answers Topology Learning Objectives Setup and run the simulation Examine the results Introduction: UDP and TCP are TCP/IP Protocols that correspond to OSI Layer 4, the Transport layer. The PDUs for UDP and TCP differ substantially, but they share …
3.5.1 Packet Tracer – Skills Integration Challenge-Configuring Hosts and Services Answers Topology Diagram: Partial topology given; must be completed. Device Interface IP Address Subnet Mask Default Gateway R1-ISP Fa0/0 192.168.254.253 255.255.255.0 N/A S0/0/0 10.10.10.6 255.255.255.252 R2-Central Fa0/0 172.16.255.254 255.255.0.0 N/A S0/0/0 10.10.10.5 255.255.255.252 S1-Central VLAN 1 172.16.254.1 255.255.0.0 …
3.3.2 Packet Tracer – Network Representations Answers Topology Addressing Table: This Lab does not include an Addressing Table. Learning Objectives: Configure services and support Configure DNS and HTTP on a server Configure DNS support on a PC Verify Connectivity in Realtime Mode View how DNS and HTTP work …
3.2.3 Packet Tracer – Client-Server Interaction Answers Topology Learning Objectives Setup and run the simulation Examine the results Introduction: Clients, such as desktop PCs, request services from servers. The course lab environment, using actual PCs and servers, supports a full range of services. In a simulated environment, the …
2.7.1 Packet Tracer – Skills Integration Challenge-Examining Packets Answers Topology Diagram: A nearly complete standard lab topology is provided as starting point. Device Interface IP Address Subnet Mask Default Gateway R1-ISP Fa0/0 192.168.254.253 255.255.255.0 N/A S0/0/0 10.10.10.6 255.255.255.252 R2-Central Fa0/0 172.16.255.254 255.255.0.0 N/A S0/0/0 10.10.10.5 255.255.255.252 S1-Central VLAN …