CCNA 1 Chapter 2 v5.0 Test online 2015 100%

1. Question

1 points

Which two features are characteristics of flash memory? (Choose two.)

Flash provides nonvolatile storage.
Flash receives a copy of the IOS from RAM when a device is powered on.
The contents of flash may be lost during a power cycle.
Flash is a component in Cisco switches but not in Cisco routers.
The contents of flash may be overwritten.

2. Question

1 points

A network administrator is planning an IOS upgrade on several of the head office routers and switches. Which three questions must be answered before continuing with the IOS selection and upgrade? (Choose three.)

Are the devices on the same LAN?
Do the devices have enough NVRAM to store the IOS image?
What models of routers and switches require upgrades?
What ports are installed on the routers and switches?
Do the routers and switches have enough RAM and flash memory for the proposed IOS versions?
What features are required for the devices?

3. Question

1 points

Which procedure is used to access a Cisco 2960 switch when performing an initial configuration in a secure environment?

Use Telnet to remotely access the switch through the network.
Use the console port to locally access the switch from a serial or USB interface of the PC.
Use Secure Shell to remotely access the switch through the network.
Use the AUX port to locally access the switch from a serial or USB interface of the PC.

4. Question

1 points

A network administrator needs to keep the user ID, password, and session contents private when establishing remote CLI connectivity with a switch to manage it. Which access method should be chosen?

Telnet
Console
AUX
SSH

5. Question

1 points

A router has a valid operating system and a configuration stored in NVRAM. When the router boots up, which mode will display?

global configuration mode
setup mode
ROM monitor mode
user EXEC mode

6. Question

1 points

Which two functions are provided to users by the context-sensitive help feature of the Cisco IOS CLI? (Choose two.)

providing an error message when a wrong command is submitted
displaying a list of all available commands within the current mode
allowing the user to complete the remainder of an abbreviated command with the TAB key
determining which option, keyword, or argument is available for the entered command
selecting the best command to accomplish a task

7. Question

1 points

Why is it important to configure a hostname on a device?

a Cisco router or switch only begins to operate when its hostname is set
a hostname must be configured before any other parameters
to identify the device during remote access (SSH or telnet)
to allow local access to the device through the console port

8. Question

1 points

Which two characters are allowed as part of the hostname of a Cisco device? (Choose two.)

numbers
question mark
space
tab
dash

9. Question

1 points

What is a result of using the service password-encryption command on a Cisco network device?

The command encrypts the banner message.
The command encrypts the enable mode password.
All passwords in the configuration are not shown in clear text when viewing the configuration.
A network administrator who later logs into the device will be required to enter an administrator password in order to gain access to the Cisco device.

10. Question

1 points

A new network administrator has been asked to enter a banner message on a Cisco device. What is the fastest way a network administrator could test whether the banner is properly configured?

Reboot the device.
Enter CTRL-Z at the privileged mode prompt.
Exit global configuration mode.
Power cycle the device.
Exit privileged EXEC mode and press Enter.

11. Question

1 points

Passwords can be used to restrict access to all or parts of the Cisco IOS. Select the modes and interfaces that can be protected with passwords. (Choose three.)

VTY interface
console interface
Ethernet interface
boot IOS mode
privileged EXEC mode
router configuration mode

12. Question

1 points

While trying to solve a network issue, a technician made multiple changes to the current router configuration file. The changes did not solve the problem and were not saved. What action can the technician take to discard the changes and work with the file in NVRAM?

Issue the reload command without saving the running configuration.
Delete the vlan.dat file and reboot the device.
Close and reopen the terminal emulation software.
Issue the copy startup-config running-config command.

13. Question

1 points

Which statement is true about the running configuration file in a Cisco IOS device?

It affects the operation of the device immediately when modified.
It is stored in NVRAM.
It should be deleted using the erase running-config command.
It is automatically saved when the router reboots.

14. Question

1 points

Which interface allows remote management of a Layer 2 switch?

the AUX interface
the console port interface
the switch virtual interface
the first Ethernet port interface

15. Question

1 points

Why would a Layer 2 switch need an IP address?

to enable the switch to send broadcast frames to attached PCs
to enable the switch to function as a default gateway
to enable the switch to be managed remotely
to enable the switch to receive frames from attached PCs

16. Question

1 points

What benefit does DHCP provide to a network?

Hosts always have the same IP address and are therefore always reachable.
DHCP allows users to refer to locations by a name rather than an IP address.
Hosts can connect to the network and get an IP address without manual configuration.
Duplicate addresses cannot occur on a network that issues dynamic addresses using DHCP and has static assignments.

17. Question

1 points

What command can be used on a Windows PC to see the IP configuration of that computer?

ping
ipconfig
show interfaces
show ip interface brief

18. Question

1 points

What criterion must be followed in the design of an IPv4 addressing scheme for end devices?

Each IP address must match the address that is assigned to the host by DNS.
Each IP address must be unique within the local network.
Each IP address needs to be compatible with the MAC address.
Each local host should be assigned an IP address with a unique network component.

19. Question

1 points

Refer to the exhibit. A switch was configured as shown. A ping to the default gateway was issued, but the ping was not successful. Other switches in the same network can ping this gateway. What is a possible reason for this?

The VLAN IP address and the default gateway IP address are not in the same network.
The local DNS server is not functioning correctly.
The no shutdown command was not issued for VLAN 1.
The ip default-gateway command has to be issued in the VLAN interface configuration mode.
The default gateway address must be 192.168.10.1.

20. Question

1 points

What is a user trying to determine when issuing a ping 10.1.1.1 command on a PC?

if the TCP/IP stack is functioning on the PC without putting traffic on the wire
if there is connectivity with the destination device
the path that traffic will take to reach the destination
what type of device is at the destination

CCNA 1 Chapter 2 v5.0 Test online 2015 100%

Quiz-summary

Information

Results

Categories

1. Question

2. Question

3. Question

4. Question

5. Question

6. Question

7. Question

8. Question

9. Question

10. Question

11. Question

12. Question

13. Question

14. Question

15. Question

16. Question

17. Question

18. Question

19. Question

20. Question

About The Author

ITExam Editorial Team

Average score
Your score