CCNA 1 Pretest Exam v5.0 Test online 2015 100%

1. Question

1 points

Convert the decimal number 231 into its binary equivalent. Select the correct answer from the list below.

11110010
11011011
11110110
11100111
11100101
11101110

2. Question

1 points

Convert the binary number 10111010 into its hexadecimal equivalent. Select the correct answer from the list below.

85
90
BA
A1
B3
1C

3. Question

1 points

The failure rate in a certain brand of network interface card has been determined to be 15%. How many cards could be expected to fail in a company that has 80 of the cards installed?

8
10
12
15

4. Question

1 points

A local real estate company can have its 25 computer systems upgraded for $1000. If the company chooses only to upgrade 10 systems, how much will the upgrade cost if the same rate is used?

$100
$200
$400
$500
$600

5. Question

1 points

Which two devices provide permanent data storage? (Choose two.)

Blu-Ray disc
hard drive
keyboard
monitor
RAM

6. Question

1 points

If a technician uses an average of 2 cans of compressed air per week for cleaning, how many cans should be ordered for 8 technicians over the next 10 weeks?

16
20
80
160
200

7. Question

1 points

What is a function of the BIOS?

enables a computer to connect to a network
provides temporary data storage for the CPU
performs a power-on self test of internal components
provides graphic capabilities for games and applications

8. Question

1 points

Which is a characteristic of the Internet?

It is not centrally governed.
It uses only physical addresses.
It uses private IP addressing.
It is localized to specific geographic locations.

9. Question

1 points

Which command can be used to test connectivity between two computers that are attached to a network?

ipconfig
ping
winipcfg
ifconfig
nbtstst -s

10. Question

1 points

A person-hour is the amount of work that the average worker can do in one hour. It is anticipated that a company-wide system upgrade will take approximately 60 person-hours to complete. How long will it take five technicians to perform the refresh?

5 hours
8 hours
10 hours
12 hours

11. Question

1 points

Which type of connector does a network interface card use?

DIN
PS-2
RJ-11
RJ-45

12. Question

1 points

A user is having problems accessing the Internet. The command ping www.cisco.com fails. However, pinging the IP address of cisco.com with the command ping 198.133.219.25 is successful. What is the problem?

The web server is down.
The default gateway is incorrect.
There is a problem with DNS.
The address of the ARP cache is incorrect.

13. Question

1 points

Which option shows the proper notation for an IPv6 address?

2001,0db8,3c55,0015,abcd,ff13
2001-0db8-3c55-0015-abcd-ff13
2001.0db8.3c55.0015.abcd.ff13
2001:0db8:3c55:0015::abcd:ff13

14. Question

1 points

What is the purpose of the routing process?

to encapsulate data that is used to communicate across a network
to select the paths that are used to direct traffic to destination networks
to convert a URL name into an IP address
to provide secure Internet file transfer
to forward traffic on the basis of MAC addresses

15. Question

1 points

Which device should be used for enabling a host to communicate with another host on a different network?

switch
hub
router
host

16. Question

1 points

A home user is looking for an ISP connection that provides high speed digital transmission over regular phone lines. What ISP connection type should be used?

DSL
dial-up
satellite
cell modem
cable modem

17. Question

1 points

A company is expanding its business to other countries. All branch offices must remain connected to corporate headquarters at all times. Which network technology is required to support this requirement?

LAN
MAN
WAN
WLAN

18. Question

1 points

Why would a network administrator use the tracert utility?

to determine the active TCP connections on a PC
to check information about a DNS name in the DNS server
to identify where a packet was lost or delayed on a network
to display the IP address, default gateway, and DNS server address for a PC

19. Question

1 points

Which basic process is used to select the best path for forwarding data?

routing
switching
addressing
encapsulation

20. Question

1 points

Which wireless security procedure should be used to hide the WLAN ID from wireless clients?

Configure WEP only on the access point.
Install WAP on the wireless clients.
Configure MAC address filtering on the access point.
Disable the broadcast of the SSID on the access point.
Decrease the antenna spectrum on each wireless client.

21. Question

1 points

What is the purpose of having a converged network?

to provide high speed connectivity to all end devices
to make sure that all types of data packets will be treated equally
to achieve fault tolerance and high availability of data network infrastructure devices
to reduce the cost of deploying and maintaining the communication infrastructure

22. Question

1 points

Refer to the exhibit. Consider the IP address configuration shown from PC1. What is a description of the default gateway address? i206397v1n2_206397-e1419769687559

It is the IP address of the Router1 interface that connects the company to the Internet.
It is the IP address of the Router1 interface that connects the PC1 LAN to Router1.
It is the IP address of Switch1 that connects PC1 to other devices on the same LAN.
It is the IP address of the ISP network device located in the cloud.

23. Question

1 points

Which technology provides a solution to IPv4 address depletion by allowing multiple devices to share one public IP address?

ARP
DNS
NAT
SMB
DHCP
HTTP

24. Question

1 points

Which subnet would include the address 192.168.1.96 as a usable host address?

192.168.1.64/26
192.168.1.32/27
192.168.1.32/28
192.168.1.64/29

25. Question

1 points

A technician uses the ping 127.0.0.1 command. What is the technician testing?

the TCP/IP stack on a network host
connectivity between two adjacent Cisco devices
connectivity between a PC and the default gateway
connectivity between two PCs on the same network
physical connectivity of a particular PC and the network

26. Question

1 points

Which function is provided by TCP?

data encapsulation
detection of missing packets
communication session control
path determination for data packets

27. Question

1 points

What is the purpose of ICMP messages?

to inform routers about network topology changes
to ensure the delivery of an IP packet
to provide feedback of IP packet transmissions
to monitor the process of a domain name to IP address resolution

28. Question

1 points

What statement describes the function of the Address Resolution Protocol?

ARP is used to discover the IP address of any host on a different network.
ARP is used to discover the IP address of any host on the local network.
ARP is used to discover the MAC address of any host on a different network.
ARP is used to discover the MAC address of any host on the local network.

29. Question

1 points

What is the general term that is used to describe a piece of data at any layer of a networking model?

frame
packet
protocol data unit
segment

30. Question

1 points

Which three IP addresses are private ? (Choose three.)

10.1.1.1
172.32.5.2
192.167.10.10
172.16.4.4
192.168.5.5
224.6.6.6

31. Question

1 points

How does a networked server manage requests from multiple clients for different services?

The server sends all requests through a default gateway.
Each request is assigned source and destination port numbers.
The server uses IP addresses to identify different services.
Each request is tracked through the physical address of the client.

32. Question

1 points

Which protocol translates a website name such as www.cisco.com into a network address?

HTTP
FTP
DHCP
DNS

33. Question

1 points

What is an advantage of using IPv6 ?

more addresses for networks and hosts
faster connectivity
higher bandwidth
more frequencies

34. Question

1 points

Refer to the exhibit. Using the network in the exhibit, what would be the default gateway address for host A in the 192.133.219.0 network? i214706v1n1_214706-e1419769718108

192.135.250.1
192.31.7.1
192.133.219.0
192.133.219.1

35. Question

1 points

Refer to the exhibit. Host_A is preparing to send data to Server_B. How will Host_A address the packets and frames that will carry this data? (Choose two.)

The packet destination will be addressed with the IP address of the Router_B interface that is attached to Router_A.
The frame destination will be addressed with the MAC address of Switch_A.
The packet destination will be addressed with the IP address of the Router_A LAN interface.
The frame destination will be addressed with the MAC address of the Router_A LAN interface.
The packet destination will be addressed with the IP address of Server_B.
The frame destination will be addressed with the MAC address of Server_B..

Average score
Your score

Quiz-summary

Information

Results

Categories

1. Question

2. Question

3. Question

4. Question

5. Question

6. Question

7. Question

8. Question

9. Question

10. Question

11. Question

12. Question

13. Question

14. Question

15. Question

16. Question

17. Question

18. Question

19. Question

20. Question

21. Question

22. Question

23. Question

24. Question

25. Question

26. Question

27. Question

28. Question

29. Question

30. Question

31. Question

32. Question

33. Question

34. Question

35. Question

About The Author

ITExam Editorial Team